All MIBs › BSUWIRELESSIF-MIB › aniBsuWirelessFreqAdminFreqValue
aniBsuWirelessFreqAdminFreqValue
Module: BSUWIRELESSIF-MIB
OID (symbolic): BSUWIRELESSIF-MIB::aniBsuWirelessFreqAdminFreqValue
OID (numeric): 1.3.6.1.4.1.4325.3.2.12.1.2
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: This object is used to configure the desired frequency values for the frequency table. Upto 19 frequency values can be added to the table. All frequencies should belong to the same frequency band. For range and validation, refer to aniBsuWirelessIfConfTargetFrequency description.
Once the values are all added/modified, the object aniBsuWirelessIfConfModify (defined in the aniBsuWirelessIfConfTable) needs to be set to true(1). The aniBsuWirelessIfConfModify flag is used to modify and commit the changes of the dependent wireless parameters including all the entries of the aniBsuWirelessFreqAdminTable.
If the validation fails when aniBsuWirelessIfConfModify is set to true(1), these changes are not commited and an error is returned. In that case, the modified parameters in this table may not reflect the correct values. They will display the values last configured by the user, rather than the actual values on the device. To view the current values, refer to the aniBsuWirelessFreqOperTable. Each entry in this aniBsuWirelessFreqAdminTable has a corresponding entry displaying the actual values in the aniBsuWirelessFreqOperTable.
What is aniBsuWirelessFreqAdminFreqValue?
Allows operators to configure one of up to 19 allowable frequency values (in MHz) in the BSU wireless frequency administration table, all of which must belong to the same frequency band. This writable object is used to define the set of frequencies eligible for automatic frequency selection.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4325.3.2.12.1.2 snmpwalk -v2c -c public <target> BSUWIRELESSIF-MIB::aniBsuWirelessFreqAdminFreqValue
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4325.3.2.12.1.2.1 snmpget -v2c -c public <target> BSUWIRELESSIF-MIB::aniBsuWirelessFreqAdminFreqValue.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4325.3.2.12.1.2.1 s <value>
Start monitoring Aperto Networks (Ceragon) PacketWave/WiMAX base station units (BSU) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BSUWIRELESSIF-MIB::aniBsuWirelessFreqAdminFreqValue OID value, configure state conditions and alerts, and monitor any Aperto Networks (Ceragon) PacketWave/WiMAX base station units (BSU) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4325 | ani | ANIROOT-MIB |
| 1.3.6.1.4.1.4325.3 | bsu | ANIROOT-MIB |
| 1.3.6.1.4.1.4325.3.2 | aniBsuWirelessIf | ANIROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4325.3.2.12 | aniBsuWirelessFreqAdminTable | BSUWIRELESSIF-MIB |
| 1.3.6.1.4.1.4325.3.2.12.1 | aniBsuWirelessFreqAdminEntry | BSUWIRELESSIF-MIB |
| 1.3.6.1.4.1.4325.3.2.12.1.2 | aniBsuWirelessFreqAdminFreqValue | BSUWIRELESSIF-MIB |