All MIBs › BSC3270-OPT-MIB › cdx6500BSC3270DevControl
cdx6500BSC3270DevControl
Module: BSC3270-OPT-MIB
OID (symbolic): BSC3270-OPT-MIB::cdx6500BSC3270DevControl
OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.4.1.1.7
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: Specifies device control parameters: NONE - no device control parameter set. GPOLL- disables specific polling of a device. The device will only be polled by general polls. (TPAD only) SPOLL- forces specific polling of a device. (TPAD only) NSERV- no service messages will be sent to the device. (TPAD only) NSTAT- disables the generation of dummy DEVICE END status message. (HPAD only) RVI - forces TPAD to send RVI as an ACK for terminal text/status messages terminated with ETB or ETX. (TPAD only)
Any combination of above specified by summing (e.g. GPOLL+NSERV).
Configuration Notes: GPOLL overrides SPOLL if both are selected, this is not recommended. Devices under a COMMON CU ADDRESS must have identical Polling methods (e.g. CU 40 has 4 devices, all devices must be GPOLL, SPOLL or neither.)
What is cdx6500BSC3270DevControl?
This read-only object specifies device-level control parameters (combinable): GPOLL and SPOLL (TPAD-only, disable or force specific polling of the device, with GPOLL overriding SPOLL if both are set), NSERV (TPAD-only, suppresses service messages), NSTAT (HPAD-only, disables dummy DEVICE END status messages), and RVI (TPAD-only, forces RVI acknowledgement for text/status messages ending in ETB/ETX).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.4.1.1.7 snmpwalk -v2c -c public <target> BSC3270-OPT-MIB::cdx6500BSC3270DevControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.4.1.1.7.1 snmpget -v2c -c public <target> BSC3270-OPT-MIB::cdx6500BSC3270DevControl.1
Start monitoring Motorola Codex 6500-series data/statistical multiplexer (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BSC3270-OPT-MIB::cdx6500BSC3270DevControl OID value, configure state conditions and alerts, and monitor any Motorola Codex 6500-series data/statistical multiplexer (legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1 | cdx6500CfgProtocolGroup | ALC-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.1.4 | cdx6500PCTBSC3270DeviceGroup | BSC3270-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.4.1 | cdx6500PBCTBSC3270DevTable | BSC3270-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.4.1.1 | cdx6500PBCTBSC3270DevEntry | BSC3270-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.4.1.1.7 | cdx6500BSC3270DevControl | BSC3270-OPT-MIB |