All MIBs › BROCADE-MPLS-MIB › bcsiMplsLspPathSelectRevertTimer
bcsiMplsLspPathSelectRevertTimer
Module: BROCADE-MPLS-MIB
OID (symbolic): BROCADE-MPLS-MIB::bcsiMplsLspPathSelectRevertTimer
OID (numeric): 1.3.6.1.4.1.1588.3.1.10.1.2.3.1.32
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The number of seconds to wait after the primary or selected path comes up before traffic reverts to that path. A value of 0 indicates that it will switch immediately after the current working path goes down.
What is bcsiMplsLspPathSelectRevertTimer?
Reports the number of seconds the device waits after a primary or selected MPLS path becomes operational before reverting traffic back to it, providing a stability delay to avoid rapid path flapping. A value of 0 means traffic switches back immediately.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1588.3.1.10.1.2.3.1.32 snmpwalk -v2c -c public <target> BROCADE-MPLS-MIB::bcsiMplsLspPathSelectRevertTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1588.3.1.10.1.2.3.1.32.1 snmpget -v2c -c public <target> BROCADE-MPLS-MIB::bcsiMplsLspPathSelectRevertTimer.1
Start monitoring Brocade/Extreme IP/MPLS core routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BROCADE-MPLS-MIB::bcsiMplsLspPathSelectRevertTimer OID value, configure state conditions and alerts, and monitor any Brocade/Extreme IP/MPLS core routers from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1588 | bcsi | Brocade-REG-MIB |
| 1.3.6.1.4.1.1588.3 | bcsiReg | Brocade-REG-MIB |
| 1.3.6.1.4.1.1588.3.1 | bcsiModules | Brocade-REG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1588.3.1.10 | brocadeMplsMIB | BROCADE-MPLS-MIB |
| 1.3.6.1.4.1.1588.3.1.10.1 | bcsiMplsObjects | BROCADE-MPLS-MIB |
| 1.3.6.1.4.1.1588.3.1.10.1.2 | bcsiMplsLspInfo | BROCADE-MPLS-MIB |
| 1.3.6.1.4.1.1588.3.1.10.1.2.3 | bcsiMplsLspTable | BROCADE-MPLS-MIB |
| 1.3.6.1.4.1.1588.3.1.10.1.2.3.1 | bcsiMplsLspEntry | BROCADE-MPLS-MIB |
| 1.3.6.1.4.1.1588.3.1.10.1.2.3.1.32 | bcsiMplsLspPathSelectRevertTimer | BROCADE-MPLS-MIB |