All MIBs › BROCADE-MPLS-MIB › bcsiMplsLspPathSelectMode
bcsiMplsLspPathSelectMode
Module: BROCADE-MPLS-MIB
OID (symbolic): BROCADE-MPLS-MIB::bcsiMplsLspPathSelectMode
OID (numeric): 1.3.6.1.4.1.1588.3.1.10.1.2.3.1.30
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Indicates the path selection mode to use. Auto-select is the default mode. I this mode, the primary path is always selected to carry traffic when the primary path has stayed operating in the working state for at least the amount of time specified in bcsiMplsLspPathSelectRevertTimer. For manual-select, traffic is switched to a user- selected path specified in bcsiMplsLspPathSelectPathname after the selected path has stayed operating in the working state for at least the amount of time specified in bcsiMplsLspPathSelectRevertTimer. For unconditional-select, traffic is switched to and stays on the selected path regardless of the path's condition even if it is in a failure state.
What is bcsiMplsLspPathSelectMode?
Indicates the path selection mode for an MPLS LSP, such as auto-select (which automatically reverts to the primary path after it stabilizes) or manual/unconditional modes where the operator specifies which path carries traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1588.3.1.10.1.2.3.1.30 snmpwalk -v2c -c public <target> BROCADE-MPLS-MIB::bcsiMplsLspPathSelectMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1588.3.1.10.1.2.3.1.30.1 snmpget -v2c -c public <target> BROCADE-MPLS-MIB::bcsiMplsLspPathSelectMode.1
Start monitoring Brocade/Extreme IP/MPLS core routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BROCADE-MPLS-MIB::bcsiMplsLspPathSelectMode OID value, configure state conditions and alerts, and monitor any Brocade/Extreme IP/MPLS core routers from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1588 | bcsi | Brocade-REG-MIB |
| 1.3.6.1.4.1.1588.3 | bcsiReg | Brocade-REG-MIB |
| 1.3.6.1.4.1.1588.3.1 | bcsiModules | Brocade-REG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1588.3.1.10 | brocadeMplsMIB | BROCADE-MPLS-MIB |
| 1.3.6.1.4.1.1588.3.1.10.1 | bcsiMplsObjects | BROCADE-MPLS-MIB |
| 1.3.6.1.4.1.1588.3.1.10.1.2 | bcsiMplsLspInfo | BROCADE-MPLS-MIB |
| 1.3.6.1.4.1.1588.3.1.10.1.2.3 | bcsiMplsLspTable | BROCADE-MPLS-MIB |
| 1.3.6.1.4.1.1588.3.1.10.1.2.3.1 | bcsiMplsLspEntry | BROCADE-MPLS-MIB |
| 1.3.6.1.4.1.1588.3.1.10.1.2.3.1.30 | bcsiMplsLspPathSelectMode | BROCADE-MPLS-MIB |