All MIBs › BRI-OPT-MIB › cdx6500BRIX25ChanCfgX25Options
cdx6500BRIX25ChanCfgX25Options
Module: BRI-OPT-MIB
OID (symbolic): BRI-OPT-MIB::cdx6500BRIX25ChanCfgX25Options
OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.37
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: Select X.25 options as follows: NONE - no option specified 1980 - use X.25 1980 NUI - perform network user identification validation check PDN - connected to Public Data Network CUD - use call user data subaddressing IBAR - bar all calls coming in from X.25 port user OBAR - bar all calls going out to X.25 port user CBCK - allow routing inbound calls back out this port CUG - check closed user group; otherwise, CUG passes transparently CAUSE - pass cause, diagnostic, code in outbound packets HOLD - hold calls over link restart NRST - do not send restart packet on link-up BKUP - this is a backup port to be activated if other ports are down INL - inter-node link. Link goes to another 6500 device INLA - set with INL option when an X.25 link connection is to a 6500 node using 2.12.04 or earlier DELAY - Enable Delay and Path Trace on this link (link must be connected to Rel. 4.xx node) Any combination of above specified by summing (e.g. 1980+NUI+. . .).
What is cdx6500BRIX25ChanCfgX25Options?
A combinable list of X.25 protocol options enabled on this link, such as NUI (validate network user ID), PDN (connected to a Public Data Network), CUG (enforce closed user group checks), or BKUP (this port acts as a backup, activated only if other ports go down). Codes are summed together to enable multiple options at once, e.g. 1980+NUI.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.37 snmpwalk -v2c -c public <target> BRI-OPT-MIB::cdx6500BRIX25ChanCfgX25Options
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.37.1 snmpget -v2c -c public <target> BRI-OPT-MIB::cdx6500BRIX25ChanCfgX25Options.1
Start monitoring Motorola Codex 6500-series data/statistical multiplexer (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BRI-OPT-MIB::cdx6500BRIX25ChanCfgX25Options OID value, configure state conditions and alerts, and monitor any Motorola Codex 6500-series data/statistical multiplexer (legacy) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1 | cdx6500CfgProtocolGroup | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1 | cdx6500PCTPortProtocolGroup | ALC-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.1.1.26 | cdx6500PPCTISDN | BRI-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1 | cdx6500PPCTBRIConfig | BRI-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2 | cdx6500PPCTBRIChan | BRI-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1 | cdx6500PPCTBRIX25ChanTable | BRI-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1 | cdx6500PPCTBRIX25ChanEntry | BRI-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.37 | cdx6500BRIX25ChanCfgX25Options | BRI-OPT-MIB |