BRI-OPT-MIB :: cdx6500BRIX25ChanCfgAddrTrans

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBRI-OPT-MIBcdx6500BRIX25ChanCfgAddrTrans

cdx6500BRIX25ChanCfgAddrTrans

Module: BRI-OPT-MIB

OID (symbolic): BRI-OPT-MIB::cdx6500BRIX25ChanCfgAddrTrans

OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.62

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-only

Description: Select any of the following address translation options NONE - no option specified Outbound Call Processing: DEDO - delete called address DEGO - delete calling address REGO - replace calling address with configured Port Address REGSO - replace calling address with configured Port Address plus Inbound Subaddress obtained from the Inbound Call Translation Table entry where Private Network Address matches the entire calling address INGO - replace calling address with configured Port Address and retain original calling subaddress SAGO - strip calling address, but retain subaddress

Inbound Call Processing: INGI - replace calling address with configured Port Address and retain original calling subaddress REGI - replace calling address with configured Port Address SRGI - select route from the Calling Address Translation Table by replacing the called address with the Private Network Address where the Inbound Calling Address matches the beginning of the calling address

Call Accept Processing: DADA - delete called address in inbound/outbound call accept DAGA - delete calling address in inbound/outbound call accept IADD - copy called and calling addresses from call request into outbound call accepted/connected Some of the options may be combined (e.g. DEDO + DEGO).

What is cdx6500BRIX25ChanCfgAddrTrans?

A combinable set of address-translation options applied during call processing, covering outbound calls (e.g. DEDO deletes the called address, REGO replaces the calling address with the configured port address), inbound calls (e.g. REGI, SRGI for route selection via a translation table), and call-accept processing (e.g. DADA, DAGA, IADD). Multiple options can be combined, e.g. DEDO + DEGO.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.62
snmpwalk -v2c -c public <target> BRI-OPT-MIB::cdx6500BRIX25ChanCfgAddrTrans

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.62.1
snmpget -v2c -c public <target> BRI-OPT-MIB::cdx6500BRIX25ChanCfgAddrTrans.1

Start monitoring Motorola Codex 6500-series data/statistical multiplexer (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BRI-OPT-MIB::cdx6500BRIX25ChanCfgAddrTrans OID value, configure state conditions and alerts, and monitor any Motorola Codex 6500-series data/statistical multiplexer (legacy) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.449codexALC-OPT-MIB
1.3.6.1.4.1.449.2cdxProductSpecificALC-OPT-MIB
1.3.6.1.4.1.449.2.1cdx6500ALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2cdx6500ConfigurationALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1cdx6500CfgProtocolGroupALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1cdx6500PCTPortProtocolGroupALC-OPT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.449.2.1.2.1.1.26cdx6500PPCTISDNBRI-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1.26.1cdx6500PPCTBRIConfigBRI-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1.26.1.2cdx6500PPCTBRIChanBRI-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1cdx6500PPCTBRIX25ChanTableBRI-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1cdx6500PPCTBRIX25ChanEntryBRI-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.62cdx6500BRIX25ChanCfgAddrTransBRI-OPT-MIB