All MIBs › BRCM-SSH-MGMT-MIB › sshHackerInactivityTimeout
sshHackerInactivityTimeout
Module: BRCM-SSH-MGMT-MIB
OID (symbolic): BRCM-SSH-MGMT-MIB::sshHackerInactivityTimeout
OID (numeric): 1.3.6.1.4.1.4413.50.1.1.2.1.1.4.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls the length of time after which an entry in the sshHackerTable will be removed if there are no further attempts to access the system from the corresponding sshHackerAddress. Note that if this object is set to zero, the sshHackerTable will be effectively disabled and no IP addresses will be blacklisted for unauthorized access. If set to -1, entries in the sshHackerTable will never be aged out and once blacklisted, only a system reboot will allow another attempted login from the blacklisted address.
What is sshHackerInactivityTimeout?
Controls how long an entry for an unauthorized SSH access attempt is retained in the hacker table after no further attempts are seen from that address. Setting it to zero causes the hacker table to grow without automatic expiry.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.50.1.1.2.1.1.4.12 snmpwalk -v2c -c public <target> BRCM-SSH-MGMT-MIB::sshHackerInactivityTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.50.1.1.2.1.1.4.12.1 snmpget -v2c -c public <target> BRCM-SSH-MGMT-MIB::sshHackerInactivityTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.50.1.1.2.1.1.4.12.1 i <value>
Start monitoring Broadcom-chipset DOCSIS cable modems/gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BRCM-SSH-MGMT-MIB::sshHackerInactivityTimeout OID value, configure state conditions and alerts, and monitor any Broadcom-chipset DOCSIS cable modems/gateways from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.50 | brcmCableData | BRCM-CABLEDATA-SMI |
| 1.3.6.1.4.1.4413.50.1 | cableData | BRCM-CABLEDATA-SMI |
| 1.3.6.1.4.1.4413.50.1.1 | cableDataMgmt | BRCM-CABLEDATA-SMI |
| 1.3.6.1.4.1.4413.50.1.1.2 | cableDataMgmtMIB | BRCM-CABLEDATA-MGMT-MIB |
| 1.3.6.1.4.1.4413.50.1.1.2.1 | cableDataMgmtMIBObjects | BRCM-CABLEDATA-MGMT-MIB |
| 1.3.6.1.4.1.4413.50.1.1.2.1.1 | cableDataMgmtBase | BRCM-CABLEDATA-MGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.50.1.1.2.1.1.4 | sshMgmt | BRCM-SSH-MGMT-MIB |
| 1.3.6.1.4.1.4413.50.1.1.2.1.1.4.12 | sshHackerInactivityTimeout | BRCM-SSH-MGMT-MIB |