BRCM-80211-MGMT-MIB :: dot11OperMode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBRCM-80211-MGMT-MIBdot11OperMode

dot11OperMode

Module: BRCM-80211-MGMT-MIB

OID (symbolic): BRCM-80211-MGMT-MIB::dot11OperMode

OID (numeric): 1.3.6.1.4.1.4413.50.1.1.2.1.5.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Used to control the 802.11 operational mode. If set to notAvailable(0), then the wireless interface will be disabled, with the radio off, and no wireless settings web pages will be available to the user.

If set to off(1) then the wireless interface will be disabled, but there may be a web page present which indicates that wireless service is available and that the MSO should be contacted to enable it.

If set to remote(2), then the wireless interface will be enabled, but the configuration web pages are read-only so that the user may not change the settings.

If set to local(3), then the wireless interface will be enabled, and the web pages will be read-write so that the user has full control over the settings.

What is dot11OperMode?

Controls whether the 802.11 wireless interface is enabled and in what mode it operates, with options including fully disabled (radio off), off (no web pages), or active wireless modes. Administrators use this to enable or disable the wireless radio entirely.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.50.1.1.2.1.5.1.1
snmpwalk -v2c -c public <target> BRCM-80211-MGMT-MIB::dot11OperMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.50.1.1.2.1.5.1.1.1
snmpget -v2c -c public <target> BRCM-80211-MGMT-MIB::dot11OperMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.50.1.1.2.1.5.1.1.1 i <value>

Start monitoring Broadcom-chipset DOCSIS cable modems/gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BRCM-80211-MGMT-MIB::dot11OperMode OID value, configure state conditions and alerts, and monitor any Broadcom-chipset DOCSIS cable modems/gateways from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomEdgeSwitch-REF-MIB
1.3.6.1.4.1.4413.50brcmCableDataBRCM-CABLEDATA-SMI
1.3.6.1.4.1.4413.50.1cableDataBRCM-CABLEDATA-SMI
1.3.6.1.4.1.4413.50.1.1cableDataMgmtBRCM-CABLEDATA-SMI
1.3.6.1.4.1.4413.50.1.1.2cableDataMgmtMIBBRCM-CABLEDATA-MGMT-MIB
1.3.6.1.4.1.4413.50.1.1.2.1cableDataMgmtMIBObjectsBRCM-CABLEDATA-MGMT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.50.1.1.2.1.5ieee802dot11MgmtBRCM-80211-MGMT-MIB
1.3.6.1.4.1.4413.50.1.1.2.1.5.1dot11MgmtBaseBRCM-80211-MGMT-MIB
1.3.6.1.4.1.4413.50.1.1.2.1.5.1.1dot11OperModeBRCM-80211-MGMT-MIB