BRCM-80211-MGMT-MIB :: dot11BssWepDefaultKey

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBRCM-80211-MGMT-MIBdot11BssWepDefaultKey

dot11BssWepDefaultKey

Module: BRCM-80211-MGMT-MIB

OID (symbolic): BRCM-80211-MGMT-MIB::dot11BssWepDefaultKey

OID (numeric): 1.3.6.1.4.1.4413.50.1.1.2.1.5.4.2.1.1.1

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: Controls and reflects the default key which will be used when 64 or 128 bit encryption is enabled. Indicates the entry from the dot11BssWep64BitKeyTable if dot11EncryptionMode is set to wep64(1), or the entry from the dot11BssWep128BitKeyTable if dot11BssSecurityMode is set to wep128(2).

This object may only be set to indicate an active row in the dot11BssWep64BitKeyTable or dot11BssWep128BitKeyTable. If the value corresponds to a row which does not exist or a row which is not active, the set will be rejected with an inconsistentValue error.

What is dot11BssWepDefaultKey?

Specifies which WEP key index is used as the default for encrypting and decrypting traffic on this BSS when WEP security is active. The referenced key is drawn from either the 64-bit or 128-bit WEP key table depending on the encryption mode selected.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.50.1.1.2.1.5.4.2.1.1.1
snmpwalk -v2c -c public <target> BRCM-80211-MGMT-MIB::dot11BssWepDefaultKey

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.50.1.1.2.1.5.4.2.1.1.1.1
snmpget -v2c -c public <target> BRCM-80211-MGMT-MIB::dot11BssWepDefaultKey.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.50.1.1.2.1.5.4.2.1.1.1.1 i <value>

Start monitoring Broadcom-chipset DOCSIS cable modems/gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BRCM-80211-MGMT-MIB::dot11BssWepDefaultKey OID value, configure state conditions and alerts, and monitor any Broadcom-chipset DOCSIS cable modems/gateways from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomEdgeSwitch-REF-MIB
1.3.6.1.4.1.4413.50brcmCableDataBRCM-CABLEDATA-SMI
1.3.6.1.4.1.4413.50.1cableDataBRCM-CABLEDATA-SMI
1.3.6.1.4.1.4413.50.1.1cableDataMgmtBRCM-CABLEDATA-SMI
1.3.6.1.4.1.4413.50.1.1.2cableDataMgmtMIBBRCM-CABLEDATA-MGMT-MIB
1.3.6.1.4.1.4413.50.1.1.2.1cableDataMgmtMIBObjectsBRCM-CABLEDATA-MGMT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.50.1.1.2.1.5ieee802dot11MgmtBRCM-80211-MGMT-MIB
1.3.6.1.4.1.4413.50.1.1.2.1.5.4dot11MgmtMbssBRCM-80211-MGMT-MIB
1.3.6.1.4.1.4413.50.1.1.2.1.5.4.2dot11MbssSecurityBRCM-80211-MGMT-MIB
1.3.6.1.4.1.4413.50.1.1.2.1.5.4.2.1dot11BssWepTableBRCM-80211-MGMT-MIB
1.3.6.1.4.1.4413.50.1.1.2.1.5.4.2.1.1dot11BssWepEntryBRCM-80211-MGMT-MIB
1.3.6.1.4.1.4413.50.1.1.2.1.5.4.2.1.1.1dot11BssWepDefaultKeyBRCM-80211-MGMT-MIB