Description: Security mode may be chosen from Disable, WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise or RADIUS-WEP. All devices on the network must use the same security mode in order to communicate.

If set to disabled(0): Open system. No authentication or encryption.

If set to wep(1) then the following parameters must be set: Default Transmit Key (dot11BssWepDefaultKey): Choose which Key to use. WEP Key Bit (dot11BssWepSecurityMode): May select from 64-Bit or 128-Bit encryption. Passphrase (dot11BssWepPassPhrase): Enter a passphrase consisting of any keyboard character to be used to generate a hex WEP key. Key 1-4 (dot11BssWep64BitKeyTable or dot11BssWep128BitKeyTable): Enter a WEP key manually. Must use only hex character (0-9 and A-F). 64-bit WEP requires 10 hex characters, 128-Bit WEP requires the use of 26 hex characters.

If set to wpaPsk(2) then the following parameters must be set: WPA Algorithm (dot11BssWpaAlgorithm): TKIP or AES. WPA Pre-Shared Key (dot11BssWpaPreSharedKey): Choose a unique key to authenticate with other devices on the network. The Pre-Shared Key must be between 8 and 63 characters in length. Group Key Renewal (dot11BssWpaGroupRekeyInterval): This settingss determines how often the group key changes.

If set to wpa2Psk(3) then the following parameters must be set: WPA2 Algorithm (dot11BssWpaAlgorithm): AES or TKIP+AES. WPA2 Pre-Shared Key (dot11BssWpaPreSharedKey): Choose a unique key to authenticate with other devices on the network. The Pre-Shared Key must be between 8 and 63 characters in length. Group Key Renewal (dot11BssWpaGroupRekeyInterval): This settingss determines how often the group key changes.

If set to wpaEnterprise(4) then the following parameters must be set: WPA Algorithm (dot11BssWpaAlgorithm): TKIP or AES. RADIUS Server Address (dot11BssRadiusIp): The IP address of the RADIUS server. RADIUS Server Port (dot11BssRadiusPort): The port the RADIUS server uses. RADIUS Shared Secret (dot11BssRadiusKey): The shared secret set on the RADIUS server. Key Renewal Timeout (dot11BssRadiusReAuthInterval): Determines how often the keys should be renened.

If set to wpa2Enterprise(5) then the following parameters must be set: WPA2 Algorithm (dot11BssWpaAlgorithm): AES or TKIP+AES. RADIUS Server Address (dot11BssRadiusIp): The IP address of the RADIUS server. RADIUS Server Port (dot11BssRadiusPort): The port the RADIUS server uses. RADIUS Shared Secret (dot11BssRadiusKey): The shared secret set on the RADIUS server. Key Renewal Timeout (dot11BssRadiusReAuthInterval): Determines how often the keys should be renened.

If set to radiusWep(6) then the following parameters must be set: RADIUS Server Address (dot11BssRadiusAddressType / dot11BssRadiusAddress): The IP address of the RADIUS server. RADIUS Server Port (dot11BssRadiusPort): The port the RADIUS server uses. RADIUS Shared Secret (dot11BssRadiusKey): The shared secret set on the RADIUS server. Default Transmit Key (dot11BssWepDefaultKey): Choose which Key to use. WEP Key Bit (dot11BssWepEncryptionMode): May select from 64-Bit or 128-Bit encryption. Passphrase (dot11BssWepPassPhrase): Enter a passphrase consisting of any keyboard character to be used to generate a hex WEP key. Key 1-4 (dot11BssWep64BitKeyTable or dot11BssWep128BitKeyTable): Enter a WEP key manually. Must use only hex character (0-9 and A-F). 64-bit WEP requires 10 hex characters, 128-Bit WEP requires the use of 26 hex characters.