All MIBs › BIANCA-BRICK-ATM2-MIB › atmOamCCEnd2EndActivation
atmOamCCEnd2EndActivation
Module: BIANCA-BRICK-ATM2-MIB
OID (symbolic): BIANCA-BRICK-ATM2-MIB::atmOamCCEnd2EndActivation
OID (numeric): 1.3.6.1.4.1.272.4.16.13.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines wether OAM continuity check activation request will be activated and/or accepted for the associated end-to-end connection. If set to passive(1) or both(3) CC activation requests will be confirmed. If set to active(2) or both CC will be requested. If set to no-negotiation(4) - depending on the settings in atmOamCCEnd2EndDirection - CC cells will be send and/or expected periodically without any previous CC activation negotiation. If set to none(5) neither CC activation will be requested/confirmed nor any CC cells will be generated/expected.
What is atmOamCCEnd2EndActivation?
Determines wether OAM continuity check activation request will be activated and/or accepted for the associated end-to-end connection. If set to passive(1) or both(3) CC activation requests . Monitoring atmOamCCEnd2EndActivation on this device provides operational insight into bianca subsystem behavior. Typical operation shows this value changing based on bianca activity.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.16.13.1.11 snmpwalk -v2c -c public <target> BIANCA-BRICK-ATM2-MIB::atmOamCCEnd2EndActivation
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.16.13.1.11.1 snmpget -v2c -c public <target> BIANCA-BRICK-ATM2-MIB::atmOamCCEnd2EndActivation.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.16.13.1.11.1 i <value>
Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-ATM2-MIB::atmOamCCEnd2EndActivation OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.272 | bintec | BIANCA-BOX-ISDN-MIB |
| 1.3.6.1.4.1.272.4 | bibo | BIANCA-BOX-ISDN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.272.4.16 | atm | BIANCA-BRICK-ATM2-MIB |
| 1.3.6.1.4.1.272.4.16.13 | atmOamTable | BIANCA-BRICK-ATM2-MIB |
| 1.3.6.1.4.1.272.4.16.13.1 | atmOamEntry | BIANCA-BRICK-ATM2-MIB |
| 1.3.6.1.4.1.272.4.16.13.1.11 | atmOamCCEnd2EndActivation | BIANCA-BRICK-ATM2-MIB |