All MIBs › BDCOM-SYS › bdenvTestPt5Measure
bdenvTestPt5Measure
Module: BDCOM-SYS
OID (symbolic): BDCOM-SYS::bdenvTestPt5Measure
OID (numeric): 1.3.6.1.4.1.3320.2.1.87
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Current value of test point 5. Typically the value in millivolts of the -12v supply
What is bdenvTestPt5Measure?
This OID reports the current value of test point 5 in millivolts, typically the -12V supply voltage. Readings deviating from -12000 mV suggest power supply issues. Example: a reading of -11950 means the -12V rail is delivering -11.95 volts, slightly less negative than nominal.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3320.2.1.87 snmpwalk -v2c -c public <target> BDCOM-SYS::bdenvTestPt5Measure
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3320.2.1.87.1 snmpget -v2c -c public <target> BDCOM-SYS::bdenvTestPt5Measure.1
Start monitoring BDCOM networking equipment (switches/routers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BDCOM-SYS::bdenvTestPt5Measure OID value, configure state conditions and alerts, and monitor any BDCOM networking equipment (switches/routers) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3320 | bdcom | BDCOM-SMI |
| 1.3.6.1.4.1.3320.2 | bdlocal | BDCOM-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3320.2.1 | bdlsystem | BDCOM-SYS |
| 1.3.6.1.4.1.3320.2.1.87 | bdenvTestPt5Measure | BDCOM-SYS |