All MIBs › BDCOM-SYS › bdenvTestPt3Measure
bdenvTestPt3Measure
Module: BDCOM-SYS
OID (symbolic): BDCOM-SYS::bdenvTestPt3Measure
OID (numeric): 1.3.6.1.4.1.3320.2.1.83
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Current value of test point 3. Typically the value in millivolts of the +5v supply
What is bdenvTestPt3Measure?
This OID reports the current value of test point 3 in millivolts, typically the +5V supply voltage. Deviations from 5000 mV indicate power supply problems. Example: a reading of 5040 means the +5V supply is delivering 5.04 volts, slightly above nominal.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3320.2.1.83 snmpwalk -v2c -c public <target> BDCOM-SYS::bdenvTestPt3Measure
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3320.2.1.83.1 snmpget -v2c -c public <target> BDCOM-SYS::bdenvTestPt3Measure.1
Start monitoring BDCOM networking equipment (switches/routers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BDCOM-SYS::bdenvTestPt3Measure OID value, configure state conditions and alerts, and monitor any BDCOM networking equipment (switches/routers) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3320 | bdcom | BDCOM-SMI |
| 1.3.6.1.4.1.3320.2 | bdlocal | BDCOM-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3320.2.1 | bdlsystem | BDCOM-SYS |
| 1.3.6.1.4.1.3320.2.1.83 | bdenvTestPt3Measure | BDCOM-SYS |