All MIBs › BDCOM-SYS › bdenvTestPt2Measure
bdenvTestPt2Measure
Module: BDCOM-SYS
OID (symbolic): BDCOM-SYS::bdenvTestPt2Measure
OID (numeric): 1.3.6.1.4.1.3320.2.1.81
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Current value of test point 2. Typically a temperature in centigrade.
What is bdenvTestPt2Measure?
This OID reports the current value of test point 2, typically exhaust air temperature in Celsius. High exhaust temps indicate heavy device load or cooling problems. Example: a reading of 42 shows the air exiting the device is 42 degrees Celsius.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3320.2.1.81 snmpwalk -v2c -c public <target> BDCOM-SYS::bdenvTestPt2Measure
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3320.2.1.81.1 snmpget -v2c -c public <target> BDCOM-SYS::bdenvTestPt2Measure.1
Start monitoring BDCOM networking equipment (switches/routers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BDCOM-SYS::bdenvTestPt2Measure OID value, configure state conditions and alerts, and monitor any BDCOM networking equipment (switches/routers) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3320 | bdcom | BDCOM-SMI |
| 1.3.6.1.4.1.3320.2 | bdlocal | BDCOM-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3320.2.1 | bdlsystem | BDCOM-SYS |
| 1.3.6.1.4.1.3320.2.1.81 | bdenvTestPt2Measure | BDCOM-SYS |