BDCOM-QOS-PIB-MIB :: qosUnmatchedPolicyDscpTrusted

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBDCOM-QOS-PIB-MIBqosUnmatchedPolicyDscpTrusted

qosUnmatchedPolicyDscpTrusted

Module: BDCOM-QOS-PIB-MIB

OID (symbolic): BDCOM-QOS-PIB-MIB::qosUnmatchedPolicyDscpTrusted

OID (numeric): 1.3.6.1.4.1.3320.18.2.1.4.1.1.5

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-only

Description: If this attribute is true, then the Dscp associated with the packet is trusted, i.e., it is assumed to have already been set. In this case, the Dscp is not rewritten with qosUnmatchedPolicyDscp (qosUnmatchedPolicyDscp is ignored) unless this is a non-IP packet and arrives untagged. The packet is still policed as part of its micro flow and its aggregate flow.

When a trusted action is applied to an input interface, the Dscp (for an IP packet) or CoS (for a non-IP packet) associated with the packet is the one contained in the packet. When a trusted action is applied to an output interface, the Dscp associated with the packet is the one that is the result of the input classification and policing.

What is qosUnmatchedPolicyDscpTrusted?

Indicates whether the existing DSCP marking on unmatched packets should be trusted and left unchanged rather than overwritten with the default value. When true, the device assumes the upstream source has already applied the correct DSCP marking.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3320.18.2.1.4.1.1.5
snmpwalk -v2c -c public <target> BDCOM-QOS-PIB-MIB::qosUnmatchedPolicyDscpTrusted

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3320.18.2.1.4.1.1.5.1
snmpget -v2c -c public <target> BDCOM-QOS-PIB-MIB::qosUnmatchedPolicyDscpTrusted.1

Start monitoring BDCOM networking equipment (switches/routers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BDCOM-QOS-PIB-MIB::qosUnmatchedPolicyDscpTrusted OID value, configure state conditions and alerts, and monitor any BDCOM networking equipment (switches/routers) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3320bdcomBDCOM-SMI
1.3.6.1.4.1.3320.18bdcomPolicyAutoBDCOM-SMI
1.3.6.1.4.1.3320.18.2bdcomPibToMibBDCOM-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3320.18.2.1bdcomQosPIBMIBBDCOM-QOS-PIB-MIB
1.3.6.1.4.1.3320.18.2.1.4qosUnmatchedPolicyBDCOM-QOS-PIB-MIB
1.3.6.1.4.1.3320.18.2.1.4.1qosUnmatchedPolicyTableBDCOM-QOS-PIB-MIB
1.3.6.1.4.1.3320.18.2.1.4.1.1qosUnmatchedPolicyEntryBDCOM-QOS-PIB-MIB
1.3.6.1.4.1.3320.18.2.1.4.1.1.5qosUnmatchedPolicyDscpTrustedBDCOM-QOS-PIB-MIB