BDCOM-QOS-PIB-MIB :: qosIpAceProtocol

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBDCOM-QOS-PIB-MIBqosIpAceProtocol

qosIpAceProtocol

Module: BDCOM-QOS-PIB-MIB

OID (symbolic): BDCOM-QOS-PIB-MIB::qosIpAceProtocol

OID (numeric): 1.3.6.1.4.1.3320.18.2.1.7.1.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The IP protocol to match against the packet's protocol. A value of zero means match all.

What is qosIpAceProtocol?

Indicates the IP protocol number (e.g., 6 for TCP, 17 for UDP) that a packet must use to match this ACE. A value of zero means the rule applies to all protocols regardless of type.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3320.18.2.1.7.1.1.8
snmpwalk -v2c -c public <target> BDCOM-QOS-PIB-MIB::qosIpAceProtocol

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3320.18.2.1.7.1.1.8.1
snmpget -v2c -c public <target> BDCOM-QOS-PIB-MIB::qosIpAceProtocol.1

Start monitoring BDCOM networking equipment (switches/routers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BDCOM-QOS-PIB-MIB::qosIpAceProtocol OID value, configure state conditions and alerts, and monitor any BDCOM networking equipment (switches/routers) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3320bdcomBDCOM-SMI
1.3.6.1.4.1.3320.18bdcomPolicyAutoBDCOM-SMI
1.3.6.1.4.1.3320.18.2bdcomPibToMibBDCOM-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3320.18.2.1bdcomQosPIBMIBBDCOM-QOS-PIB-MIB
1.3.6.1.4.1.3320.18.2.1.7qosIpQosBDCOM-QOS-PIB-MIB
1.3.6.1.4.1.3320.18.2.1.7.1qosIpAceTableBDCOM-QOS-PIB-MIB
1.3.6.1.4.1.3320.18.2.1.7.1.1qosIpAceEntryBDCOM-QOS-PIB-MIB
1.3.6.1.4.1.3320.18.2.1.7.1.1.8qosIpAceProtocolBDCOM-QOS-PIB-MIB