All MIBs › BDCOM-FLASH › bdflashVPP
bdflashVPP
Module: BDCOM-FLASH
OID (symbolic): BDCOM-FLASH::bdflashVPP
OID (numeric): 1.3.6.1.4.1.3320.2.10.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: State of the VPP DIP jumper on the Flash memory card. Files can be written to the Flash memory card only if the VPP DIP jumper is turned on.
What is bdflashVPP?
This enumeration indicates whether the VPP (programming voltage) jumper is installed on the flash card—required for writing new data. Operators must verify this is set to installed(1) before any flash update. Example: if bdflashVPP = missing(2), the write-protect jumper is missing and no new firmware can be written; it must be reinstalled or the card replaced.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3320.2.10.5 snmpwalk -v2c -c public <target> BDCOM-FLASH::bdflashVPP
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3320.2.10.5.1 snmpget -v2c -c public <target> BDCOM-FLASH::bdflashVPP.1
Start monitoring BDCOM networking equipment (switches/routers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BDCOM-FLASH::bdflashVPP OID value, configure state conditions and alerts, and monitor any BDCOM networking equipment (switches/routers) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3320 | bdcom | BDCOM-SMI |
| 1.3.6.1.4.1.3320.2 | bdlocal | BDCOM-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3320.2.10 | bdlflash | BDCOM-FLASH |
| 1.3.6.1.4.1.3320.2.10.5 | bdflashVPP | BDCOM-FLASH |