All MIBs › BCSSIMULCRYPTSCS-MIB › bcsSimScsEcmgRedundancyConfigManualSwitchBack
bcsSimScsEcmgRedundancyConfigManualSwitchBack
Module: BCSSIMULCRYPTSCS-MIB
OID (symbolic): BCSSIMULCRYPTSCS-MIB::bcsSimScsEcmgRedundancyConfigManualSwitchBack
OID (numeric): 1.3.6.1.4.1.1166.7.7.1.3.1.3
Node type: OBJECT-TYPE
Type: ManualSwitchBackTYPE
Access: read-write
Description: When autoswitchback is enabled manual switch back is notActive.When manual switch back Button get pressed Manual switch back state get changed from manualSwitchBackNotInProgress(1) to (2)manualSwitchBack.Then the programs (which were taken away earlier from this ECMG upon its failure)will be switched back to it. Once the switchback progress get finished ,manual switch back state changed to (1) manualSwitchBackNotInProgress.
What is bcsSimScsEcmgRedundancyConfigManualSwitchBack?
Provides an operator-triggered control to manually switch programs back to a previously failed ECMG after its recovery, used when automatic switchback is disabled. Pressing the manual switchback button transitions the state from 'manualSwitchBackNotInProgress' to 'manualSwitchBack', initiating the program migration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.7.7.1.3.1.3 snmpwalk -v2c -c public <target> BCSSIMULCRYPTSCS-MIB::bcsSimScsEcmgRedundancyConfigManualSwitchBack
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.7.7.1.3.1.3.1 snmpget -v2c -c public <target> BCSSIMULCRYPTSCS-MIB::bcsSimScsEcmgRedundancyConfigManualSwitchBack.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.7.7.1.3.1.3.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> bcsSimScsEcmgRedundancyConfigManualSwitchBack.1
Start monitoring Motorola BCS SimulCrypt broadcast headend equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BCSSIMULCRYPTSCS-MIB::bcsSimScsEcmgRedundancyConfigManualSwitchBack OID value, configure state conditions and alerts, and monitor any Motorola BCS SimulCrypt broadcast headend equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.7 | bcs | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.7.7 | bcsSimulcryptScs | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.7.7.1 | bcsSimScsConfig | BCSSIMULCRYPTSCS-MIB |
| 1.3.6.1.4.1.1166.7.7.1.3 | bcsSimScsEcmgRedundancyConfigTable | BCSSIMULCRYPTSCS-MIB |
| 1.3.6.1.4.1.1166.7.7.1.3.1 | bcsSimScsEcmgRedundancyConfigEntry | BCSSIMULCRYPTSCS-MIB |
| 1.3.6.1.4.1.1166.7.7.1.3.1.3 | bcsSimScsEcmgRedundancyConfigManualSwitchBack | BCSSIMULCRYPTSCS-MIB |