All MIBs › BCSSIMULCRYPTSCS-MIB › bcsSimScsEcmgRedundancyConfigApplyChange
bcsSimScsEcmgRedundancyConfigApplyChange
Module: BCSSIMULCRYPTSCS-MIB
OID (symbolic): BCSSIMULCRYPTSCS-MIB::bcsSimScsEcmgRedundancyConfigApplyChange
OID (numeric): 1.3.6.1.4.1.1166.7.7.1.4.1.2
Node type: OBJECT-TYPE
Type: ApplyDataToDeviceTYPE
Access: read-write
Description: The Apply for a row of data in bcsSimScsEcmgRedundancyConfigTable. A row in this table corresponds to the same row index in the bcsSimScsEcmgRedundancyConfigTable. This parameter MUST be set to 'apply' in order for any of the data in the rows to take effect in the SEM. This parameter MUST be set LAST after all other data in the configuration table rows has been configured. @Config(config=no, reboot=no)
What is bcsSimScsEcmgRedundancyConfigApplyChange?
Acts as a commit trigger for a row in the ECMG redundancy configuration table; the row's settings do not become active until this parameter is set to 'apply'. If the submitted data is invalid, the state transitions to 'applyNotInProgressInvalidData' and an error description is available in the corresponding invalid-apply-text field.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.7.7.1.4.1.2 snmpwalk -v2c -c public <target> BCSSIMULCRYPTSCS-MIB::bcsSimScsEcmgRedundancyConfigApplyChange
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.7.7.1.4.1.2.1 snmpget -v2c -c public <target> BCSSIMULCRYPTSCS-MIB::bcsSimScsEcmgRedundancyConfigApplyChange.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.7.7.1.4.1.2.1 s <value>
Start monitoring Motorola BCS SimulCrypt broadcast headend equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BCSSIMULCRYPTSCS-MIB::bcsSimScsEcmgRedundancyConfigApplyChange OID value, configure state conditions and alerts, and monitor any Motorola BCS SimulCrypt broadcast headend equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.7 | bcs | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.7.7 | bcsSimulcryptScs | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.7.7.1 | bcsSimScsConfig | BCSSIMULCRYPTSCS-MIB |
| 1.3.6.1.4.1.1166.7.7.1.4 | bcsSimScsEcmgRedundancyConfigApplyTable | BCSSIMULCRYPTSCS-MIB |
| 1.3.6.1.4.1.1166.7.7.1.4.1 | bcsSimScsEcmgRedundancyConfigApplyEntry | BCSSIMULCRYPTSCS-MIB |
| 1.3.6.1.4.1.1166.7.7.1.4.1.2 | bcsSimScsEcmgRedundancyConfigApplyChange | BCSSIMULCRYPTSCS-MIB |