BCSSIMULCRYPTSCS-MIB :: bcsSimScsEcmIdInitial

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › BCSSIMULCRYPTSCS-MIB › bcsSimScsEcmIdInitial

bcsSimScsEcmIdInitial

Module: BCSSIMULCRYPTSCS-MIB

OID (symbolic): BCSSIMULCRYPTSCS-MIB::bcsSimScsEcmIdInitial

OID (numeric): 1.3.6.1.4.1.1166.7.7.1.1.6

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: Each ECM ID and Super CAS ID combination in the Simulcrypt system must be globally unique. To simplify configuration, each SCS is given a starting ECM ID to assign to the first ECM stream it creates. The number is incremented as new ECM streams are created. Each SCS must be configured with a different value. The initial values should be spaced sufficiently to prevent overlapping. Recommended spacing is 128.

SEM Note: Once written, a save must be performed via the semSaveConfig parameter and the SEM must be rebooted for the change to take effect.

What is bcsSimScsEcmIdInitial?

Sets the starting ECM (Entitlement Control Message) ID that the SCS assigns to the first ECM stream it creates, with the value incrementing automatically for each subsequent stream. This ensures globally unique ECM ID and Super CAS ID combinations across the Simulcrypt system.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.7.7.1.1.6
snmpwalk -v2c -c public <target> BCSSIMULCRYPTSCS-MIB::bcsSimScsEcmIdInitial

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.7.7.1.1.6.1
snmpget -v2c -c public <target> BCSSIMULCRYPTSCS-MIB::bcsSimScsEcmIdInitial.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.7.7.1.1.6.1 i <value>

Start monitoring Motorola BCS SimulCrypt broadcast headend equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BCSSIMULCRYPTSCS-MIB::bcsSimScsEcmIdInitial OID value, configure state conditions and alerts, and monitor any Motorola BCS SimulCrypt broadcast headend equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1166giBCS-IDENT-MIB
1.3.6.1.4.1.1166.7bcsBCS-IDENT-MIB
1.3.6.1.4.1.1166.7.7bcsSimulcryptScsBCS-IDENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1166.7.7.1bcsSimScsConfigBCSSIMULCRYPTSCS-MIB
1.3.6.1.4.1.1166.7.7.1.1bcsSimScsConfigGeneralBCSSIMULCRYPTSCS-MIB
1.3.6.1.4.1.1166.7.7.1.1.6bcsSimScsEcmIdInitialBCSSIMULCRYPTSCS-MIB