BCSSIMULCRYPTMUX-MIB :: bcsSimMuxBandwidthAllocation

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › BCSSIMULCRYPTMUX-MIB › bcsSimMuxBandwidthAllocation

bcsSimMuxBandwidthAllocation

Module: BCSSIMULCRYPTMUX-MIB

OID (symbolic): BCSSIMULCRYPTMUX-MIB::bcsSimMuxBandwidthAllocation

OID (numeric): 1.3.6.1.4.1.1166.7.8.1.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This value specifies the bandwidth in kbps allocated to each connected mux as reported in the Stream_BW_allocation message. A value of zero will cause the Mux to report the allocated bandwidth as Not Known.

SEM Note: Once written, a save must be performed via the semSaveConfig parameter and the SEM must be rebooted for the change to take effect.

What is bcsSimMuxBandwidthAllocation?

This read-write OID sets the bandwidth (in kbps) allocated to each connected multiplexer, as reported in the Stream_BW_allocation message for a Simulcrypt system. Setting it to zero causes the mux to report the allocated bandwidth as unknown; any change requires a configuration save to take effect.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.7.8.1.1.4
snmpwalk -v2c -c public <target> BCSSIMULCRYPTMUX-MIB::bcsSimMuxBandwidthAllocation

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.7.8.1.1.4.1
snmpget -v2c -c public <target> BCSSIMULCRYPTMUX-MIB::bcsSimMuxBandwidthAllocation.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.7.8.1.1.4.1 i <value>

Start monitoring Motorola BCS SimulCrypt broadcast headend equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BCSSIMULCRYPTMUX-MIB::bcsSimMuxBandwidthAllocation OID value, configure state conditions and alerts, and monitor any Motorola BCS SimulCrypt broadcast headend equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1166giBCS-IDENT-MIB
1.3.6.1.4.1.1166.7bcsBCS-IDENT-MIB
1.3.6.1.4.1.1166.7.8bcsSimulcryptMuxBCS-IDENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1166.7.8.1bcsSimMuxConfigBCSSIMULCRYPTMUX-MIB
1.3.6.1.4.1.1166.7.8.1.1bcsSimMuxConfigGeneralBCSSIMULCRYPTMUX-MIB
1.3.6.1.4.1.1166.7.8.1.1.4bcsSimMuxBandwidthAllocationBCSSIMULCRYPTMUX-MIB