All MIBs › BCS-STATE-MIB › unitAlarmStatus

unitAlarmStatus

OID (symbolic): BCS-STATE-MIB::unitAlarmStatus

OID (numeric): 1.3.6.1.4.1.1166.7.2.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This state should be always supported. This object defines the Alarm status described by ISO/IEC 10164-2 and state-machine; however, the actual values used are based on perceived severity values defined by ISO/IEC 10164-4.

What is unitAlarmStatus?

This OID reflects the current alarm status of a unit, using severity values derived from ISO/IEC 10164-2, and can be written as part of alarm state management. It indicates whether the unit is currently in an alarmed condition and at what severity.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.7.2.5
snmpwalk -v2c -c public <target> BCS-STATE-MIB::unitAlarmStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.7.2.5.1
snmpget -v2c -c public <target> BCS-STATE-MIB::unitAlarmStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.7.2.5.1 i <value>

Start monitoring Belden/Hirschmann BCS-series industrial Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BCS-STATE-MIB::unitAlarmStatus OID value, configure state conditions and alerts, and monitor any Belden/Hirschmann BCS-series industrial Ethernet switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.1166	gi	BCS-IDENT-MIB
1.3.6.1.4.1.1166.7	bcs	BCS-IDENT-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.1166.7.2	bcsState	BCS-STATE-MIB
1.3.6.1.4.1.1166.7.2.5	unitAlarmStatus	BCS-STATE-MIB

BCS-STATE-MIB :: unitAlarmStatus

unitAlarmStatus

Module

This MIB depends on