All MIBs › BASIS-SHELF-MIB › shelfFunctionModuleState
shelfFunctionModuleState
Module: BASIS-SHELF-MIB
OID (symbolic): BASIS-SHELF-MIB::shelfFunctionModuleState
OID (numeric): 1.3.6.1.4.1.351.110.1.1.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object holds the status of a card in a particular shelf-slot. The hold state is applicable only to MGX8800 Platform. The Slave PXM assumes the hold state during PXM Upgrades. In this state the Slave PXM will be running a different fw but will be receiving all Standby updates(BRAM and Database). The description for the two new states is as follows: 'notResponding' - Response from the Service module has become slow probably due to overloading of CPU. No recovery action is required on user part. At present, this state is implemented only for RPM card. 'cardinit' - When the physical presence of card has been detected but the communication hasn't yet been established between the controller card (PXM) and Service Module.
What is shelfFunctionModuleState?
This read-only integer reports the operational state of a card in a shelf slot: nocard(1) if missing, standby(2) for passive redundancy, active(3) for operating, failed(4) if broken, or selfTest(5) when running diagnostics. Gives operators instant visibility into module health across the entire system. Example: a value of 4 (failed) with an ifIndex of 5 means card 5 is non-functional and requires service or replacement.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.1.1.1.1.4 snmpwalk -v2c -c public <target> BASIS-SHELF-MIB::shelfFunctionModuleState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.1.1.1.1.4.1 snmpget -v2c -c public <target> BASIS-SHELF-MIB::shelfFunctionModuleState.1
Start monitoring Cisco MGX/BASIS voice and ATM switching chassis (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BASIS-SHELF-MIB::shelfFunctionModuleState OID value, configure state conditions and alerts, and monitor any Cisco MGX/BASIS voice and ATM switching chassis (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.1 | basisSystem | BASIS-MIB |
| 1.3.6.1.4.1.351.110.1.1 | basisShelf | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.1.1.1 | shelfTable | BASIS-SHELF-MIB |
| 1.3.6.1.4.1.351.110.1.1.1.1 | shelfEntry | BASIS-SHELF-MIB |
| 1.3.6.1.4.1.351.110.1.1.1.1.4 | shelfFunctionModuleState | BASIS-SHELF-MIB |