All MIBs › BASIS-SHELF-MIB › shelfFunctionModuleHoldReset
shelfFunctionModuleHoldReset
Module: BASIS-SHELF-MIB
OID (symbolic): BASIS-SHELF-MIB::shelfFunctionModuleHoldReset
OID (numeric): 1.3.6.1.4.1.351.110.1.1.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object holds the card in a particular shelf-slot, in reset, If the object is set to holdInReset. If the object is set to doNotHold, then it only reset the card in the specified slot, if slot number is 17 then it'll reset the whole shelf.
What is shelfFunctionModuleHoldReset?
This read-write control puts a card in a given shelf slot into or out of a held-reset state; setting it to reset a slot numbered 17 resets the entire shelf instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.1.1.1.1.6 snmpwalk -v2c -c public <target> BASIS-SHELF-MIB::shelfFunctionModuleHoldReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.1.1.1.1.6.1 snmpget -v2c -c public <target> BASIS-SHELF-MIB::shelfFunctionModuleHoldReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.1.1.1.1.6.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.1 | basisSystem | BASIS-MIB |
| 1.3.6.1.4.1.351.110.1.1 | basisShelf | BASIS-MIB |
| 1.3.6.1.4.1.351.110.1.1.1 | shelfTable | BASIS-SHELF-MIB |
| 1.3.6.1.4.1.351.110.1.1.1.1 | shelfEntry | BASIS-SHELF-MIB |
| 1.3.6.1.4.1.351.110.1.1.1.1.6 | shelfFunctionModuleHoldReset | BASIS-SHELF-MIB |