BAS-CMTS-CONFIG-MIB :: basFlapEntryLastModemState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBAS-CMTS-CONFIG-MIBbasFlapEntryLastModemState

basFlapEntryLastModemState

Module: BAS-CMTS-CONFIG-MIB

OID (symbolic): BAS-CMTS-CONFIG-MIB::basFlapEntryLastModemState

OID (numeric): 1.3.6.1.4.1.3493.2.4.1.1.11.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Specifies the modem state when this modem last flapped. State is as specified in the RF Interface Specification, and indicates the following events: other(1) Any state other than below. ranging(2) The CMTS has received an Initial Ranging Request message from the CM, and the ranging process is not yet complete. rangingAborted(3) The CMTS has sent a Ranging Abort message to the CM. rangingComplete(4) The CMTS has sent a Ranging Complete message to the CM. ipComplete(5) The CMTS has received a DHCP reply message and forwarded it to the CM. registrationComplete(6) The CMTS has sent a Registration Response mesage to the CM. accessDenied(7) The CMTS has sent a Registration Aborted message to the CM.

What is basFlapEntryLastModemState?

Reports the standard DOCSIS RF Interface Specification modem state -- such as ranging, rangingAborted, rangingComplete, ipComplete, registrationComplete, or accessDenied -- that this modem was in the last time it flapped, giving admins a quick clue as to where in the join process the failure happened.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3493.2.4.1.1.11.1.9
snmpwalk -v2c -c public <target> BAS-CMTS-CONFIG-MIB::basFlapEntryLastModemState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3493.2.4.1.1.11.1.9.1
snmpget -v2c -c public <target> BAS-CMTS-CONFIG-MIB::basFlapEntryLastModemState.1

Start monitoring Broadband Access Systems (BAS) CMTS (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BAS-CMTS-CONFIG-MIB::basFlapEntryLastModemState OID value, configure state conditions and alerts, and monitor any Broadband Access Systems (BAS) CMTS (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3493basMIBBAS-MIB
1.3.6.1.4.1.3493.2basMibGroupBAS-MIB
1.3.6.1.4.1.3493.2.4basExtCmtsBAS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3493.2.4.1basCmtsConfigMibBAS-CMTS-CONFIG-MIB
1.3.6.1.4.1.3493.2.4.1.1basCmtsConfigObjectsBAS-CMTS-CONFIG-MIB
1.3.6.1.4.1.3493.2.4.1.1.11basFlapTableBAS-CMTS-CONFIG-MIB
1.3.6.1.4.1.3493.2.4.1.1.11.1basFlapEntryBAS-CMTS-CONFIG-MIB
1.3.6.1.4.1.3493.2.4.1.1.11.1.9basFlapEntryLastModemStateBAS-CMTS-CONFIG-MIB