All MIBs › BAS-CM-CONFIG-MIB › basCmDsFreq

basCmDsFreq

OID (symbolic): BAS-CM-CONFIG-MIB::basCmDsFreq

OID (numeric): 1.3.6.1.4.1.3493.2.12.1.1

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The receive frequency to be used by the CM. It is an override for the channel selected during scanning. This is the center frequency of the downstream channel in Hz stored as a 32-bit binary number.

What is basCmDsFreq?

Specifies the downstream receive frequency (in Hz, as a 32-bit integer) that the cable modem (CM) should use, overriding the channel selected during initial channel scanning. This allows manual tuning of the downstream channel center frequency.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3493.2.12.1.1
snmpwalk -v2c -c public <target> BAS-CM-CONFIG-MIB::basCmDsFreq

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3493.2.12.1.1.1
snmpget -v2c -c public <target> BAS-CM-CONFIG-MIB::basCmDsFreq.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3493.2.12.1.1.1 i <value>

Start monitoring Broadband Access Systems (BAS) CMTS (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BAS-CM-CONFIG-MIB::basCmDsFreq OID value, configure state conditions and alerts, and monitor any Broadband Access Systems (BAS) CMTS (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.3493	basMIB	BAS-MIB
1.3.6.1.4.1.3493.2	basMibGroup	BAS-MIB
1.3.6.1.4.1.3493.2.12	basCmConfig	BAS-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.3493.2.12.1	basCmConfigMIB	BAS-CM-CONFIG-MIB
1.3.6.1.4.1.3493.2.12.1.1	basCmDsFreq	BAS-CM-CONFIG-MIB

BAS-CM-CONFIG-MIB :: basCmDsFreq

basCmDsFreq

Module

This MIB depends on