All MIBs › BAS-CM-CONFIG-MIB › basCmBpiRekeyWaitTimeout
basCmBpiRekeyWaitTimeout
Module: BAS-CM-CONFIG-MIB
OID (symbolic): BAS-CM-CONFIG-MIB::basCmBpiRekeyWaitTimeout
OID (numeric): 1.3.6.1.4.1.3493.2.12.1.17.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is basCmBpiRekeyWaitTimeout?
Sets the maximum time (in seconds) a cable modem will wait for a new Traffic Encryption Key (TEK) from the CMTS during the BPI periodic rekey process. Expiry of this timer causes the modem to re-initiate the key exchange.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3493.2.12.1.17.5 snmpwalk -v2c -c public <target> BAS-CM-CONFIG-MIB::basCmBpiRekeyWaitTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3493.2.12.1.17.5.1 snmpget -v2c -c public <target> BAS-CM-CONFIG-MIB::basCmBpiRekeyWaitTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3493.2.12.1.17.5.1 i <value>
Start monitoring Broadband Access Systems (BAS) CMTS (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BAS-CM-CONFIG-MIB::basCmBpiRekeyWaitTimeout OID value, configure state conditions and alerts, and monitor any Broadband Access Systems (BAS) CMTS (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3493 | basMIB | BAS-MIB |
| 1.3.6.1.4.1.3493.2 | basMibGroup | BAS-MIB |
| 1.3.6.1.4.1.3493.2.12 | basCmConfig | BAS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3493.2.12.1 | basCmConfigMIB | BAS-CM-CONFIG-MIB |
| 1.3.6.1.4.1.3493.2.12.1.17 | basCmBpiSettings | BAS-CM-CONFIG-MIB |
| 1.3.6.1.4.1.3493.2.12.1.17.5 | basCmBpiRekeyWaitTimeout | BAS-CM-CONFIG-MIB |