All MIBs › BAS-CM-CONFIG-MIB › basCmBpiAuthWaitTimeout

basCmBpiAuthWaitTimeout

OID (symbolic): BAS-CM-CONFIG-MIB::basCmBpiAuthWaitTimeout

OID (numeric): 1.3.6.1.4.1.3493.2.12.1.17.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

What is basCmBpiAuthWaitTimeout?

Configures the timeout period (in seconds) that a cable modem will wait for an authorization reply from the CMTS during the BPI (Baseline Privacy Interface) initial authentication process. If no response is received within this time, the modem retries the authorization request.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3493.2.12.1.17.1
snmpwalk -v2c -c public <target> BAS-CM-CONFIG-MIB::basCmBpiAuthWaitTimeout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3493.2.12.1.17.1.1
snmpget -v2c -c public <target> BAS-CM-CONFIG-MIB::basCmBpiAuthWaitTimeout.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3493.2.12.1.17.1.1 i <value>

Start monitoring Broadband Access Systems (BAS) CMTS (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BAS-CM-CONFIG-MIB::basCmBpiAuthWaitTimeout OID value, configure state conditions and alerts, and monitor any Broadband Access Systems (BAS) CMTS (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.3493	basMIB	BAS-MIB
1.3.6.1.4.1.3493.2	basMibGroup	BAS-MIB
1.3.6.1.4.1.3493.2.12	basCmConfig	BAS-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.3493.2.12.1	basCmConfigMIB	BAS-CM-CONFIG-MIB
1.3.6.1.4.1.3493.2.12.1.17	basCmBpiSettings	BAS-CM-CONFIG-MIB
1.3.6.1.4.1.3493.2.12.1.17.1	basCmBpiAuthWaitTimeout	BAS-CM-CONFIG-MIB

BAS-CM-CONFIG-MIB :: basCmBpiAuthWaitTimeout

basCmBpiAuthWaitTimeout

Module

This MIB depends on