AtiEdgeSwitch-MIB :: atiStkSwPortMirroringDestinationPortId

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAtiEdgeSwitch-MIBatiStkSwPortMirroringDestinationPortId

atiStkSwPortMirroringDestinationPortId

Module: AtiEdgeSwitch-MIB

OID (symbolic): AtiEdgeSwitch-MIB::atiStkSwPortMirroringDestinationPortId

OID (numeric): 1.3.6.1.4.1.207.8.17.2.2.5

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This object specifies the port ID (on the module specified by 'atiStkSwPortMirroringDestinationModuleId') of the destination port that mirrors the source port (specified by 'atiStkSwPortMirroringSourceModuleId' and 'atiStkSwPortMirroringSourcePortId'). All packets transmitted and received on the source port will be mirrored onto the destination port.

This object will have a value of 0 when port mirroring is disabled. When mirroring is enabled, set this object to a non-zero value to activate mirroring.

What is atiStkSwPortMirroringDestinationPortId?

Specifies the port ID on the destination module where all mirrored packets from the configured source port are sent. This port is the monitoring port where a network analyzer or IDS would be connected.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.17.2.2.5
snmpwalk -v2c -c public <target> AtiEdgeSwitch-MIB::atiStkSwPortMirroringDestinationPortId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.17.2.2.5.1
snmpget -v2c -c public <target> AtiEdgeSwitch-MIB::atiStkSwPortMirroringDestinationPortId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.17.2.2.5.1 i <value>

Start monitoring Allied Telesis AT-9000/AT-8100S/AT-8100L/AT-FS970M edge switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AtiEdgeSwitch-MIB::atiStkSwPortMirroringDestinationPortId OID value, configure state conditions and alerts, and monitor any Allied Telesis AT-9000/AT-8100S/AT-8100L/AT-FS970M edge switches (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.207alliedTelesynAT-RG600-MIB
1.3.6.1.4.1.207.8mibObjectAT-RG600-MIB
Numeric OIDNameModule
1.3.6.1.4.1.207.8.17atiStkSwMibAtiEdgeSwitch-MIB
1.3.6.1.4.1.207.8.17.2atiStkSwPortGroupAtiEdgeSwitch-MIB
1.3.6.1.4.1.207.8.17.2.2atiStkSwPortMirroringConfigAtiEdgeSwitch-MIB
1.3.6.1.4.1.207.8.17.2.2.5atiStkSwPortMirroringDestinationPortIdAtiEdgeSwitch-MIB