AtiEdgeSwitch-MIB :: atiStkSwPortMirroringDestinationModuleId

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAtiEdgeSwitch-MIBatiStkSwPortMirroringDestinationModuleId

atiStkSwPortMirroringDestinationModuleId

Module: AtiEdgeSwitch-MIB

OID (symbolic): AtiEdgeSwitch-MIB::atiStkSwPortMirroringDestinationModuleId

OID (numeric): 1.3.6.1.4.1.207.8.17.2.2.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This object specifies the module ID of the destination port that mirrors the source port (specified by 'atiStkSwPortMirroringSourceModuleId' and 'atiStkSwPortMirroringSourcePortId'). All packets transmitted and received on the source port will be mirrored onto the destination port.

This object will have a value of 0 when port mirroring is disabled. This object will have a default value of 1 (the master module ID) when mirroring is enabled.

This is not available on the 85xx and 94xx series of switches

What is atiStkSwPortMirroringDestinationModuleId?

Specifies the module ID of the switch module that contains the destination port to which mirrored traffic is sent. Together with the destination port ID, this identifies exactly where a port mirror session delivers its copied packets.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.17.2.2.4
snmpwalk -v2c -c public <target> AtiEdgeSwitch-MIB::atiStkSwPortMirroringDestinationModuleId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.17.2.2.4.1
snmpget -v2c -c public <target> AtiEdgeSwitch-MIB::atiStkSwPortMirroringDestinationModuleId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.17.2.2.4.1 i <value>

Start monitoring Allied Telesis AT-9000/AT-8100S/AT-8100L/AT-FS970M edge switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AtiEdgeSwitch-MIB::atiStkSwPortMirroringDestinationModuleId OID value, configure state conditions and alerts, and monitor any Allied Telesis AT-9000/AT-8100S/AT-8100L/AT-FS970M edge switches (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.207alliedTelesynAT-RG600-MIB
1.3.6.1.4.1.207.8mibObjectAT-RG600-MIB
Numeric OIDNameModule
1.3.6.1.4.1.207.8.17atiStkSwMibAtiEdgeSwitch-MIB
1.3.6.1.4.1.207.8.17.2atiStkSwPortGroupAtiEdgeSwitch-MIB
1.3.6.1.4.1.207.8.17.2.2atiStkSwPortMirroringConfigAtiEdgeSwitch-MIB
1.3.6.1.4.1.207.8.17.2.2.4atiStkSwPortMirroringDestinationModuleIdAtiEdgeSwitch-MIB