AtiEdgeSwitch-MIB :: atiStkSwPortDuplexStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAtiEdgeSwitch-MIBatiStkSwPortDuplexStatus

atiStkSwPortDuplexStatus

Module: AtiEdgeSwitch-MIB

OID (symbolic): AtiEdgeSwitch-MIB::atiStkSwPortDuplexStatus

OID (numeric): 1.3.6.1.4.1.207.8.17.2.1.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object specifies the current duplex type used by the port.

What is atiStkSwPortDuplexStatus?

Reports whether a switch port is currently operating in half-duplex or full-duplex mode. This read-only value reflects the duplex mode negotiated or configured on the port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.17.2.1.1.8
snmpwalk -v2c -c public <target> AtiEdgeSwitch-MIB::atiStkSwPortDuplexStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.17.2.1.1.8.1
snmpget -v2c -c public <target> AtiEdgeSwitch-MIB::atiStkSwPortDuplexStatus.1

Start monitoring Allied Telesis AT-9000/AT-8100S/AT-8100L/AT-FS970M edge switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AtiEdgeSwitch-MIB::atiStkSwPortDuplexStatus OID value, configure state conditions and alerts, and monitor any Allied Telesis AT-9000/AT-8100S/AT-8100L/AT-FS970M edge switches (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.207alliedTelesynAT-RG600-MIB
1.3.6.1.4.1.207.8mibObjectAT-RG600-MIB
Numeric OIDNameModule
1.3.6.1.4.1.207.8.17atiStkSwMibAtiEdgeSwitch-MIB
1.3.6.1.4.1.207.8.17.2atiStkSwPortGroupAtiEdgeSwitch-MIB
1.3.6.1.4.1.207.8.17.2.1atiStkSwPortConfigTableAtiEdgeSwitch-MIB
1.3.6.1.4.1.207.8.17.2.1.1atiStkSwPortConfigEntryAtiEdgeSwitch-MIB
1.3.6.1.4.1.207.8.17.2.1.1.8atiStkSwPortDuplexStatusAtiEdgeSwitch-MIB