AtiEdgeSwitch-MIB :: atiStkSwPortBackPressureLimit

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAtiEdgeSwitch-MIBatiStkSwPortBackPressureLimit

atiStkSwPortBackPressureLimit

Module: AtiEdgeSwitch-MIB

OID (symbolic): AtiEdgeSwitch-MIB::atiStkSwPortBackPressureLimit

OID (numeric): 1.3.6.1.4.1.207.8.17.2.1.1.15

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This object is used to set the MDIO of this port for required cable connection type. For straight-through cable set to mdi and for cross-over cable set to mdix. This limit can be used for both BackPressure and FlowControl Limits.

Note: The range of 1 to 7935 is supported on the 94xx family.

What is atiStkSwPortBackPressureLimit?

Sets the threshold used for both back-pressure and flow control on a switch port, determining at what buffer fill level the port begins signaling the remote device to slow its transmission. Proper tuning of this limit helps balance throughput and prevent packet loss under heavy load.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.17.2.1.1.15
snmpwalk -v2c -c public <target> AtiEdgeSwitch-MIB::atiStkSwPortBackPressureLimit

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.17.2.1.1.15.1
snmpget -v2c -c public <target> AtiEdgeSwitch-MIB::atiStkSwPortBackPressureLimit.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.17.2.1.1.15.1 i <value>

Start monitoring Allied Telesis AT-9000/AT-8100S/AT-8100L/AT-FS970M edge switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AtiEdgeSwitch-MIB::atiStkSwPortBackPressureLimit OID value, configure state conditions and alerts, and monitor any Allied Telesis AT-9000/AT-8100S/AT-8100L/AT-FS970M edge switches (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.207alliedTelesynAT-RG600-MIB
1.3.6.1.4.1.207.8mibObjectAT-RG600-MIB
Numeric OIDNameModule
1.3.6.1.4.1.207.8.17atiStkSwMibAtiEdgeSwitch-MIB
1.3.6.1.4.1.207.8.17.2atiStkSwPortGroupAtiEdgeSwitch-MIB
1.3.6.1.4.1.207.8.17.2.1atiStkSwPortConfigTableAtiEdgeSwitch-MIB
1.3.6.1.4.1.207.8.17.2.1.1atiStkSwPortConfigEntryAtiEdgeSwitch-MIB
1.3.6.1.4.1.207.8.17.2.1.1.15atiStkSwPortBackPressureLimitAtiEdgeSwitch-MIB