All MIBs › Amperion-MIB › shutdownNpu
shutdownNpu
Module: Amperion-MIB
OID (symbolic): Amperion-MIB::shutdownNpu
OID (numeric): 1.3.6.1.4.1.13995.4.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Shut down 12v, -8.5v, 3.3v and 5v regulators driving the Network Processor Unit. This should only be used if one of the voltages is too high.
What is shutdownNpu?
Commands the device to shut down the voltage regulators (+12V, -8.5V, +3.3V, +5V) that power the Network Processor Unit, intended as an emergency measure if a voltage rail rises above safe levels. This read-write OID should only be used when an overvoltage condition on the NPU is detected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13995.4.13 snmpwalk -v2c -c public <target> Amperion-MIB::shutdownNpu
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.13995.4.13.1 snmpget -v2c -c public <target> Amperion-MIB::shutdownNpu.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.13995.4.13.1 i <value>
Start monitoring Amperion broadband-over-powerline (BPL) access points and CPE modems (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Amperion-MIB::shutdownNpu OID value, configure state conditions and alerts, and monitor any Amperion broadband-over-powerline (BPL) access points and CPE modems (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.13995 | amperion | Amperion-MIB |
| 1.3.6.1.4.1.13995.4 | psGroup | Amperion-MIB |
| 1.3.6.1.4.1.13995.4.13 | shutdownNpu | Amperion-MIB |