All MIBs › AirPair-MIB › redundancyStatus
redundancyStatus
Module: AirPair-MIB
OID (symbolic): AirPair-MIB::redundancyStatus
OID (numeric): 1.3.6.1.4.1.7262.1.16.19
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates whether radio redundancy is enabled or not. It can be turned on only when there is valid primary and secondary serial number in flash
What is redundancyStatus?
This read-write object indicates whether radio redundancy (a backup radio configuration) is enabled or disabled. It can only be turned on once valid primary and secondary radio serial numbers (redundancyPrimarySerialNum and redundancySecondarySerialNum) are stored in flash.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7262.1.16.19 snmpwalk -v2c -c public <target> AirPair-MIB::redundancyStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7262.1.16.19.1 snmpget -v2c -c public <target> AirPair-MIB::redundancyStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7262.1.16.19.1 i <value>
Start monitoring DragonWave microwave radios with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AirPair-MIB::redundancyStatus OID value, configure state conditions and alerts, and monitor any DragonWave microwave radios from a single console.
OID Breakdown
Upper-level ancestors (1 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7262 | dragonwave | AirPair-MIB |
| 1.3.6.1.4.1.7262.1 | airPair | AirPair-MIB |
| 1.3.6.1.4.1.7262.1.16 | apRadio | AirPair-MIB |
| 1.3.6.1.4.1.7262.1.16.19 | redundancyStatus | AirPair-MIB |