All MIBs › AirPair-MIB › mdmReset
mdmReset
Module: AirPair-MIB
OID (symbolic): AirPair-MIB::mdmReset
OID (numeric): 1.3.6.1.4.1.7262.1.15.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Writing 1 to this object causes the modem card to be reset. All other values are not recognized. This variable always reads back as 0. mdmOperStatus should be polled by the user after this object is written to, to verify that the modem card has been reset.
What is mdmReset?
Writing the value 1 to this read-write object resets the modem card; any other written value is ignored, and the object always reads back as 0 afterward. After writing it, poll mdmOperStatus to confirm the modem card actually came back up.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7262.1.15.12 snmpwalk -v2c -c public <target> AirPair-MIB::mdmReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7262.1.15.12.1 snmpget -v2c -c public <target> AirPair-MIB::mdmReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7262.1.15.12.1 i <value>
Start monitoring DragonWave microwave radios with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AirPair-MIB::mdmReset OID value, configure state conditions and alerts, and monitor any DragonWave microwave radios from a single console.
OID Breakdown
Upper-level ancestors (1 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7262 | dragonwave | AirPair-MIB |
| 1.3.6.1.4.1.7262.1 | airPair | AirPair-MIB |
| 1.3.6.1.4.1.7262.1.15 | apModem | AirPair-MIB |
| 1.3.6.1.4.1.7262.1.15.12 | mdmReset | AirPair-MIB |