All MIBs › AirPair-MIB › ifTxCableLossExceedTrap
ifTxCableLossExceedTrap
Module: AirPair-MIB
OID (symbolic): AirPair-MIB::ifTxCableLossExceedTrap
OID (numeric): 1.3.6.1.4.1.7262.1.20.26
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enables or disables the trap. This trap, if enabled, will be sent when the ethernet bandwidth utilization threshold is exceeded. If enabled, the system will send this trap to all trap hosts programmed in the system by the user. Valid only when the installation type is IDU-ODU split
What is ifTxCableLossExceedTrap?
This read-write switch enables or disables the trap sent when excessive transmit cable loss is detected (paired with txCableLossExcessive); it only applies to split IDU-ODU installations and defaults to disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7262.1.20.26 snmpwalk -v2c -c public <target> AirPair-MIB::ifTxCableLossExceedTrap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7262.1.20.26.1 snmpget -v2c -c public <target> AirPair-MIB::ifTxCableLossExceedTrap.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7262.1.20.26.1 i <value>
Start monitoring DragonWave microwave radios with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AirPair-MIB::ifTxCableLossExceedTrap OID value, configure state conditions and alerts, and monitor any DragonWave microwave radios from a single console.
OID Breakdown
Upper-level ancestors (1 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7262 | dragonwave | AirPair-MIB |
| 1.3.6.1.4.1.7262.1 | airPair | AirPair-MIB |
| 1.3.6.1.4.1.7262.1.20 | apSnmpTraps | AirPair-MIB |
| 1.3.6.1.4.1.7262.1.20.26 | ifTxCableLossExceedTrap | AirPair-MIB |