All MIBs › AirPair-MIB › hysterisisUnerredFramesPerMilliSecond
hysterisisUnerredFramesPerMilliSecond
Module: AirPair-MIB
OID (symbolic): AirPair-MIB::hysterisisUnerredFramesPerMilliSecond
OID (numeric): 1.3.6.1.4.1.7262.1.29.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The link will be automatically brought back up when the number of erred modem frames is less than this value ( only if automaticLinkReestablish is set to enabled). This threshold value cannot be crossed for the duration of time specified in the hysterisisUnerredMilliSeconds object. **NOTE: You must SET the writeRlsMonitorParametersToSystem object to write this paramater to RAM. If you write and immediately read this object, the previous value will be displayed. You should SET all parameters in this folder first, and then write to a '1' to the writeRlsMonitorParametersToSystem object. You must also save the MIB via the writing the apSaveMIB object, and then reset the system.
What is hysterisisUnerredFramesPerMilliSecond?
This read-write field sets the erred-frame threshold the link's error rate must stay below, for the duration set by hysterisisUnerredMilliSeconds, before Rapid Link Shutdown will automatically bring the link back up (only relevant when automaticLinkReestablish is enabled). Like the other RLS parameters, it only takes effect after writing writeRlsMonitorParametersToSystem, saving the MIB, and resetting the system.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7262.1.29.6 snmpwalk -v2c -c public <target> AirPair-MIB::hysterisisUnerredFramesPerMilliSecond
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7262.1.29.6.1 snmpget -v2c -c public <target> AirPair-MIB::hysterisisUnerredFramesPerMilliSecond.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7262.1.29.6.1 i <value>
Start monitoring DragonWave microwave radios with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AirPair-MIB::hysterisisUnerredFramesPerMilliSecond OID value, configure state conditions and alerts, and monitor any DragonWave microwave radios from a single console.
OID Breakdown
Upper-level ancestors (1 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7262 | dragonwave | AirPair-MIB |
| 1.3.6.1.4.1.7262.1 | airPair | AirPair-MIB |
| 1.3.6.1.4.1.7262.1.29 | rapidLinkShutdown | AirPair-MIB |
| 1.3.6.1.4.1.7262.1.29.6 | hysterisisUnerredFramesPerMilliSecond | AirPair-MIB |