All MIBs › ATSWTCH2-MIB › atswitchReset

atswitchReset

OID (symbolic): ATSWTCH2-MIB::atswitchReset

OID (numeric): 1.3.6.1.4.1.207.8.10.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Setting this object to 'switch-reset' will cause the switch to perform a hardware reset within approximately 4-6 seconds. Setting this object to 'switch-no-reset will have no effect. The value 'no-reset' will be returned whenever this object is retrieved.

What is atswitchReset?

A read-write control that, when set to 'switch-reset', triggers a hardware reset of the switch within about 4-6 seconds; it always reads back as 'no-reset' and setting it to that value has no effect.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.10.1.3
snmpwalk -v2c -c public <target> ATSWTCH2-MIB::atswitchReset

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.10.1.3.1
snmpget -v2c -c public <target> ATSWTCH2-MIB::atswitchReset.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.10.1.3.1 i <value>

Start monitoring Allied Telesyn ATM switch (fabric v2) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATSWTCH2-MIB::atswitchReset OID value, configure state conditions and alerts, and monitor any Allied Telesyn ATM switch (fabric v2) (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.207	alliedTelesyn	AT-RG600-MIB
1.3.6.1.4.1.207.8	mibObject	AT-RG600-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.207.8.10	atswitchMib	ATSWTCH2-MIB
1.3.6.1.4.1.207.8.10.1	atswitchSysGroup	ATSWTCH2-MIB
1.3.6.1.4.1.207.8.10.1.3	atswitchReset	ATSWTCH2-MIB

ATSWTCH2-MIB :: atswitchReset

atswitchReset

Module

This MIB depends on