All MIBs › ATSWTCH2-MIB › atswitchPortFlowControlEnable
atswitchPortFlowControlEnable
Module: ATSWTCH2-MIB
OID (symbolic): ATSWTCH2-MIB::atswitchPortFlowControlEnable
OID (numeric): 1.3.6.1.4.1.207.8.10.3.1.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This Per_port attribute is only for ATS21 product.(81XX). This per-port attribute describes whether the port identified has flow Control Enabled or not. Flow Control on Full Duplex and Half Duplex is detected and Automatically, flow control accordingly is taken care of. BY Default, Flow Control is Disabled.
What is atswitchPortFlowControlEnable?
Controls whether flow control is enabled on a specific switch port (ATS21/81XX product only), with the device automatically applying the appropriate flow control behavior depending on whether the link is full or half duplex.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.10.3.1.1.14 snmpwalk -v2c -c public <target> ATSWTCH2-MIB::atswitchPortFlowControlEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.10.3.1.1.14.1 snmpget -v2c -c public <target> ATSWTCH2-MIB::atswitchPortFlowControlEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.10.3.1.1.14.1 i <value>
Start monitoring Allied Telesyn ATM switch (fabric v2) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATSWTCH2-MIB::atswitchPortFlowControlEnable OID value, configure state conditions and alerts, and monitor any Allied Telesyn ATM switch (fabric v2) (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.10 | atswitchMib | ATSWTCH2-MIB |
| 1.3.6.1.4.1.207.8.10.3 | atswitchPortConfigGroup | ATSWTCH2-MIB |
| 1.3.6.1.4.1.207.8.10.3.1 | atswitchPortTable | ATSWTCH2-MIB |
| 1.3.6.1.4.1.207.8.10.3.1.1 | atswitchPortEntry | ATSWTCH2-MIB |
| 1.3.6.1.4.1.207.8.10.3.1.1.14 | atswitchPortFlowControlEnable | ATSWTCH2-MIB |