All MIBs › ATSWTCH2-MIB › atswitchMirrorState
atswitchMirrorState
Module: ATSWTCH2-MIB
OID (symbolic): ATSWTCH2-MIB::atswitchMirrorState
OID (numeric): 1.3.6.1.4.1.207.8.10.2.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: if the state of Mirroring is enabled by selecting one of the first three values , then the Mirroring explained above works. If disabled, port operation works normally. No Traffic gets routed from MirroringSourcePort to Destination Mirrored Port. Mirroring of both transmit and receive activity can only be done if the port is half duplex. Choose both only if you know the port will be run in half duplex mode.
What is atswitchMirrorState?
A read-write control that enables or disables port mirroring on the switch, determining whether traffic from the source port is copied to the destination mirror port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.10.2.3 snmpwalk -v2c -c public <target> ATSWTCH2-MIB::atswitchMirrorState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.10.2.3.1 snmpget -v2c -c public <target> ATSWTCH2-MIB::atswitchMirrorState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.10.2.3.1 i <value>
Start monitoring Allied Telesyn ATM switch (fabric v2) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATSWTCH2-MIB::atswitchMirrorState OID value, configure state conditions and alerts, and monitor any Allied Telesyn ATM switch (fabric v2) (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.10 | atswitchMib | ATSWTCH2-MIB |
| 1.3.6.1.4.1.207.8.10.2 | atswitchConfigGroup | ATSWTCH2-MIB |
| 1.3.6.1.4.1.207.8.10.2.3 | atswitchMirrorState | ATSWTCH2-MIB |