All MIBs › ATSWTCH2-MIB › atswitchBeVlanRowStatus
atswitchBeVlanRowStatus
Module: ATSWTCH2-MIB
OID (symbolic): ATSWTCH2-MIB::atswitchBeVlanRowStatus
OID (numeric): 1.3.6.1.4.1.207.8.10.4.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is supported by 37xx series of fenix with the VLAN tagging capability hardware only. Please check whether the SysObjectId is greater than 29.
This object identifies the atswitchBeVLANEntry Row Status . The User sets this object to under-construction, to start with to create a row. Once the User Configures the VlanName and TagId and also the Output Ports.This object should be set to operational. If the user does not set this object to operational, the whole row is lost .when a 'get' of this row is done, this uncommited row is not seen. configured in the switch.
What is atswitchBeVlanRowStatus?
Controls the creation, activation, or deletion lifecycle (RowStatus) of a VLAN table entry, used when provisioning or removing VLANs on tagging-capable hardware.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.10.4.1.1.5 snmpwalk -v2c -c public <target> ATSWTCH2-MIB::atswitchBeVlanRowStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.10.4.1.1.5.1 snmpget -v2c -c public <target> ATSWTCH2-MIB::atswitchBeVlanRowStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.10.4.1.1.5.1 i <value>
Start monitoring Allied Telesyn ATM switch (fabric v2) (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATSWTCH2-MIB::atswitchBeVlanRowStatus OID value, configure state conditions and alerts, and monitor any Allied Telesyn ATM switch (fabric v2) (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.10 | atswitchMib | ATSWTCH2-MIB |
| 1.3.6.1.4.1.207.8.10.4 | atswitchVlanConfigGroup | ATSWTCH2-MIB |
| 1.3.6.1.4.1.207.8.10.4.1 | atswitchBasicVlanTable | ATSWTCH2-MIB |
| 1.3.6.1.4.1.207.8.10.4.1.1 | atswitchBasicVlanEntry | ATSWTCH2-MIB |
| 1.3.6.1.4.1.207.8.10.4.1.1.5 | atswitchBeVlanRowStatus | ATSWTCH2-MIB |