ATM2-MIB :: atmSigSupportBlliRepeatInd

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsATM2-MIBatmSigSupportBlliRepeatInd

atmSigSupportBlliRepeatInd

Module: ATM2-MIB

OID (symbolic): ATM2-MIB::atmSigSupportBlliRepeatInd

OID (numeric): 1.3.6.1.2.1.37.1.14.1.4.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object indicates whether to accept, transfer, and deliver the Broadband Repeat Indicator with two or three instances of the Broadband Low Layer Information Element for low layer information selection from the calling party to the called party. This object's value should always be disabled(2) if the value of atmSigSupportLolyrInfo is disabled(2).

The value of this object can be:

- enabled(1) This Information Element is transferred to the called party

- disabled(2) This Information Element is NOT transferred to the called party.

What is atmSigSupportBlliRepeatInd?

Indicates whether the ATM signalling entity accepts and forwards the Broadband Repeat Indicator along with multiple instances of the Broadband Low Layer Information Element, allowing selection among alternative low-layer protocols. When enabled, up to three BLLI elements can be negotiated during call setup.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.37.1.14.1.4.1.6
snmpwalk -v2c -c public <target> ATM2-MIB::atmSigSupportBlliRepeatInd

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.37.1.14.1.4.1.6.1
snmpget -v2c -c public <target> ATM2-MIB::atmSigSupportBlliRepeatInd.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.37.1.14.1.4.1.6.1 i <value>

Start monitoring ATM switches/interfaces using SVC signaling with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM2-MIB::atmSigSupportBlliRepeatInd OID value, configure state conditions and alerts, and monitor any ATM switches/interfaces using SVC signaling from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.37atmMIBATM-MIB
1.3.6.1.2.1.37.1atmMIBObjectsATM-MIB
Numeric OIDNameModule
1.3.6.1.2.1.37.1.14atm2MIBATM2-MIB
1.3.6.1.2.1.37.1.14.1atm2MIBObjectsATM2-MIB
1.3.6.1.2.1.37.1.14.1.4atmSigSupportTableATM2-MIB
1.3.6.1.2.1.37.1.14.1.4.1atmSigSupportEntryATM2-MIB
1.3.6.1.2.1.37.1.14.1.4.1.6atmSigSupportBlliRepeatIndATM2-MIB