ATM2-MIB :: atmSigEmitUnavailRoutes

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsATM2-MIBatmSigEmitUnavailRoutes

atmSigEmitUnavailRoutes

Module: ATM2-MIB

OID (symbolic): ATM2-MIB::atmSigEmitUnavailRoutes

OID (numeric): 1.3.6.1.2.1.37.1.14.1.3.1.6

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: Number of Route Unavailability transmitted from this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE message for the same call), ADD PARTY REJECT, or STATUS message that contains one of the following cause code values is transmitted (Note: These cause values apply to both UNI3.0 and UNI3.1):

Cause Value Meaning

1 unallocated (unassigned) number 2 no route to specified transit network 3 no route to destination

NOTE: For this counter, RELEASE COMPLETE messages that are a reply to a previous RELEASE message and contain the same cause value, are redundant (for counting purposes) and should not be counted.

What is atmSigEmitUnavailRoutes?

This is a read-only counter measuring route unavailability notifications transmitted from an ATM interface. It tracks outbound release messages signaling routing failures to remote peers. A counter of 15 indicates this interface sent 15 route unavailability notifications upstream.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.37.1.14.1.3.1.6
snmpwalk -v2c -c public <target> ATM2-MIB::atmSigEmitUnavailRoutes

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.37.1.14.1.3.1.6.1
snmpget -v2c -c public <target> ATM2-MIB::atmSigEmitUnavailRoutes.1

Start monitoring ATM switches/interfaces using SVC signaling with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM2-MIB::atmSigEmitUnavailRoutes OID value, configure state conditions and alerts, and monitor any ATM switches/interfaces using SVC signaling from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.37atmMIBATM-MIB
1.3.6.1.2.1.37.1atmMIBObjectsATM-MIB
Numeric OIDNameModule
1.3.6.1.2.1.37.1.14atm2MIBATM2-MIB
1.3.6.1.2.1.37.1.14.1atm2MIBObjectsATM2-MIB
1.3.6.1.2.1.37.1.14.1.3atmSigStatTableATM2-MIB
1.3.6.1.2.1.37.1.14.1.3.1atmSigStatEntryATM2-MIB
1.3.6.1.2.1.37.1.14.1.3.1.6atmSigEmitUnavailRoutesATM2-MIB