All MIBs › ATM2-MIB › atmSigEmitUnavailResrcs
atmSigEmitUnavailResrcs
Module: ATM2-MIB
OID (symbolic): ATM2-MIB::atmSigEmitUnavailResrcs
OID (numeric): 1.3.6.1.2.1.37.1.14.1.3.1.8
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: Number of Resource Unavailability transmitted from this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE message for the same call), ADD PARTY REJECT, or STATUS message that contains one of the following cause code values is transmitted (Note: These cause values apply to both UNI3.0 and UNI3.1 unless otherwise stated):
Cause Value Meaning
35 requested VPCI/VCI not available 37 user cell rate not available (UNI3.1 only) 38 network out of order
41 temporary failure 45 no VPCI/VCI available 47 resource unavailable, unspecified 49 Quality of Service unavailable 51 user cell rate not available (UNI3.0 only) 58 bearer capability not presently available 63 Service or option not available, unspecified 92 too many pending add party requests
NOTE: For this counter, RELEASE COMPLETE messages that are a reply to a previous RELEASE message and contain the same cause value, are redundant (for counting purposes) and should not be counted.
What is atmSigEmitUnavailResrcs?
This is a read-only counter measuring resource unavailability notifications transmitted from an ATM interface. It tracks outbound messages signaling insufficient resources to reject incoming call attempts. A counter of 30 indicates this interface sent 30 resource unavailability notifications.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.37.1.14.1.3.1.8 snmpwalk -v2c -c public <target> ATM2-MIB::atmSigEmitUnavailResrcs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.37.1.14.1.3.1.8.1 snmpget -v2c -c public <target> ATM2-MIB::atmSigEmitUnavailResrcs.1
Start monitoring ATM switches/interfaces using SVC signaling with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM2-MIB::atmSigEmitUnavailResrcs OID value, configure state conditions and alerts, and monitor any ATM switches/interfaces using SVC signaling from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.37 | atmMIB | ATM-MIB |
| 1.3.6.1.2.1.37.1 | atmMIBObjects | ATM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.37.1.14 | atm2MIB | ATM2-MIB |
| 1.3.6.1.2.1.37.1.14.1 | atm2MIBObjects | ATM2-MIB |
| 1.3.6.1.2.1.37.1.14.1.3 | atmSigStatTable | ATM2-MIB |
| 1.3.6.1.2.1.37.1.14.1.3.1 | atmSigStatEntry | ATM2-MIB |
| 1.3.6.1.2.1.37.1.14.1.3.1.8 | atmSigEmitUnavailResrcs | ATM2-MIB |