All MIBs › ATM2-MIB › atmSigDetectCldPtyEvents
atmSigDetectCldPtyEvents
Module: ATM2-MIB
OID (symbolic): ATM2-MIB::atmSigDetectCldPtyEvents
OID (numeric): 1.3.6.1.2.1.37.1.14.1.3.1.9
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: Number of Called Party Responsible For Unsuccessful Call detected on this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE message for the same call), ADD PARTY REJECT, or STATUS message that contains one of the following cause code values is received (Note: These cause values apply to both UNI3.0 and UNI3.1):
Cause Value Meaning
17 user busy 18 no user responding 21 call rejected 22 number changed 23 user rejects all calls with calling line identification restriction (CLIR) 27 destination out of order 31 normal, unspecified 88 incompatible destination
NOTE: For this counter, RELEASE COMPLETE messages that are a reply to a previous RELEASE message and contain the same cause value, are redundant (for counting purposes) and should not be
counted.
Note: Cause Value #30 'response to STATUS ENQUIRY' was not included in this memo since it did not apply to a hard failure.
What is atmSigDetectCldPtyEvents?
This is a read-only counter tracking failures where the called party caused unsuccessful calls on an ATM interface. It counts specific cause codes like user busy indicating the remote endpoint rejected the call. A counter of 100 shows 100 call attempts failed due to called party conditions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.37.1.14.1.3.1.9 snmpwalk -v2c -c public <target> ATM2-MIB::atmSigDetectCldPtyEvents
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.37.1.14.1.3.1.9.1 snmpget -v2c -c public <target> ATM2-MIB::atmSigDetectCldPtyEvents.1
Start monitoring ATM switches/interfaces using SVC signaling with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM2-MIB::atmSigDetectCldPtyEvents OID value, configure state conditions and alerts, and monitor any ATM switches/interfaces using SVC signaling from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.37 | atmMIB | ATM-MIB |
| 1.3.6.1.2.1.37.1 | atmMIBObjects | ATM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.37.1.14 | atm2MIB | ATM2-MIB |
| 1.3.6.1.2.1.37.1.14.1 | atm2MIBObjects | ATM2-MIB |
| 1.3.6.1.2.1.37.1.14.1.3 | atmSigStatTable | ATM2-MIB |
| 1.3.6.1.2.1.37.1.14.1.3.1 | atmSigStatEntry | ATM2-MIB |
| 1.3.6.1.2.1.37.1.14.1.3.1.9 | atmSigDetectCldPtyEvents | ATM2-MIB |