All MIBs › ATM-SWITCHING-NODE-MIB › trsDump

trsDump

OID (symbolic): ATM-SWITCHING-NODE-MIB::trsDump

OID (numeric): 1.3.6.1.4.1.2.6.33.1.7.2.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: When start is selected, a dump of the Topology and Route Services component is taken. The dump is stored in the hub in a file that can be retrieved through TFTP.

What is trsDump?

Triggers a diagnostic dump of the Topology and Route Services component, storing the output in a file that can be retrieved via TFTP.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.33.1.7.2.2
snmpwalk -v2c -c public <target> ATM-SWITCHING-NODE-MIB::trsDump

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.33.1.7.2.2.1
snmpget -v2c -c public <target> ATM-SWITCHING-NODE-MIB::trsDump.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.33.1.7.2.2.1 i <value>

Start monitoring IBM ATM switching node equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM-SWITCHING-NODE-MIB::trsDump OID value, configure state conditions and alerts, and monitor any IBM ATM switching node equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.2	ibm	ATM-ADAPTER-MIB
1.3.6.1.4.1.2.6	ibmProd	ATM-ADAPTER-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.2.6.33	atmSw	ATM-SWITCHING-NODE-MIB
1.3.6.1.4.1.2.6.33.1	node	ATM-SWITCHING-NODE-MIB
1.3.6.1.4.1.2.6.33.1.7	service	ATM-SWITCHING-NODE-MIB
1.3.6.1.4.1.2.6.33.1.7.2	dumps	ATM-SWITCHING-NODE-MIB
1.3.6.1.4.1.2.6.33.1.7.2.2	trsDump	ATM-SWITCHING-NODE-MIB

ATM-SWITCHING-NODE-MIB :: trsDump

trsDump

Module

This MIB depends on