All MIBs › ATM-SWITCHING-NODE-MIB › transferControl
transferControl
Module: ATM-SWITCHING-NODE-MIB
OID (symbolic): ATM-SWITCHING-NODE-MIB::transferControl
OID (numeric): 1.3.6.1.4.1.2.6.33.1.6.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A file transfer is initiated through a start command.
What is transferControl?
A read-write control object used to initiate a file transfer (e.g., via TFTP) by setting a start command.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.33.1.6.1 snmpwalk -v2c -c public <target> ATM-SWITCHING-NODE-MIB::transferControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.33.1.6.1.1 snmpget -v2c -c public <target> ATM-SWITCHING-NODE-MIB::transferControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.33.1.6.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> transferControl.1
Start monitoring IBM ATM switching node equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM-SWITCHING-NODE-MIB::transferControl OID value, configure state conditions and alerts, and monitor any IBM ATM switching node equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | ATM-ADAPTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.33 | atmSw | ATM-SWITCHING-NODE-MIB |
| 1.3.6.1.4.1.2.6.33.1 | node | ATM-SWITCHING-NODE-MIB |
| 1.3.6.1.4.1.2.6.33.1.6 | tftp | ATM-SWITCHING-NODE-MIB |
| 1.3.6.1.4.1.2.6.33.1.6.1 | transferControl | ATM-SWITCHING-NODE-MIB |