ATM-SWITCHING-NODE-MIB :: interfaceAdminState

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ATM-SWITCHING-NODE-MIB › interfaceAdminState

interfaceAdminState

Module: ATM-SWITCHING-NODE-MIB

OID (symbolic): ATM-SWITCHING-NODE-MIB::interfaceAdminState

OID (numeric): 1.3.6.1.4.1.2.6.33.1.3.4.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The administrative state for this port. When set to disabled, no ATM traffic can pass on this port; all connections (SVC and PVC) are cleared. When set to wrap-reply, this interface is wrapped so that all the traffic received from the attached line is sent back on this line. If the interface state is not changed, it will automatically go back to the disabled state after one minute.

What is interfaceAdminState?

A read-write control for the administrative state of an ATM port; setting it to disabled clears all connections and blocks traffic, while wrap-reply loops received traffic back out.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.33.1.3.4.1.5
snmpwalk -v2c -c public <target> ATM-SWITCHING-NODE-MIB::interfaceAdminState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.33.1.3.4.1.5.1
snmpget -v2c -c public <target> ATM-SWITCHING-NODE-MIB::interfaceAdminState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.33.1.3.4.1.5.1 i <value>

Start monitoring IBM ATM switching node equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM-SWITCHING-NODE-MIB::interfaceAdminState OID value, configure state conditions and alerts, and monitor any IBM ATM switching node equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2ibmATM-ADAPTER-MIB
1.3.6.1.4.1.2.6ibmProdATM-ADAPTER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2.6.33atmSwATM-SWITCHING-NODE-MIB
1.3.6.1.4.1.2.6.33.1nodeATM-SWITCHING-NODE-MIB
1.3.6.1.4.1.2.6.33.1.3physicalATM-SWITCHING-NODE-MIB
1.3.6.1.4.1.2.6.33.1.3.4interfaceTableATM-SWITCHING-NODE-MIB
1.3.6.1.4.1.2.6.33.1.3.4.1interfaceEntryATM-SWITCHING-NODE-MIB
1.3.6.1.4.1.2.6.33.1.3.4.1.5interfaceAdminStateATM-SWITCHING-NODE-MIB