ATM-MIB :: atmVpCrossConnectH2LOperStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsATM-MIBatmVpCrossConnectH2LOperStatus

atmVpCrossConnectH2LOperStatus

Module: ATM-MIB

OID (symbolic): ATM-MIB::atmVpCrossConnectH2LOperStatus

OID (numeric): 1.3.6.1.2.1.37.1.8.1.8

Node type: OBJECT-TYPE

Type: AtmVorXOperStatus

Access: read-only

Description: H2L oper status.

What is atmVpCrossConnectH2LOperStatus?

This object indicates the operational status of an ATM Virtual Path (VP) cross-connection in one direction, specifically from the high layer to the low layer interface. The status can be up, down, testing, or unknown, representing whether traffic is successfully flowing across that VP cross-connection. An operator would check this to verify VP connectivity and identify failures in the ATM switching path.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.37.1.8.1.8
snmpwalk -v2c -c public <target> ATM-MIB::atmVpCrossConnectH2LOperStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.37.1.8.1.8.1
snmpget -v2c -c public <target> ATM-MIB::atmVpCrossConnectH2LOperStatus.1

Start monitoring ATM switches, WAN interface cards, DSL/ATM aggregation equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM-MIB::atmVpCrossConnectH2LOperStatus OID value, configure state conditions and alerts, and monitor any ATM switches, WAN interface cards, DSL/ATM aggregation equipment from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.37atmMIBATM-MIB
1.3.6.1.2.1.37.1atmMIBObjectsATM-MIB
1.3.6.1.2.1.37.1.8atmVpCrossConnectTableATM-MIB
1.3.6.1.2.1.37.1.8.1atmVpCrossConnectEntryATM-MIB
1.3.6.1.2.1.37.1.8.1.8atmVpCrossConnectH2LOperStatusATM-MIB