All MIBs › ATM-FORUM-AUTO-CONFIG › atmfAAL2SscsSsadtStatus
atmfAAL2SscsSsadtStatus
Module: ATM-FORUM-AUTO-CONFIG
OID (symbolic): ATM-FORUM-AUTO-CONFIG::atmfAAL2SscsSsadtStatus
OID (numeric): 1.3.6.1.4.1.353.2.12.6.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This specifies whether SSADT service is used or not. Note that if the value of this object is 'selected' then I.366.1 SSSAR must be supported and by implication the SSTED service must also be 'selected'. This parameter only applies to those AAL2 channels using I.366.1 SSSAR.
What is atmfAAL2SscsSsadtStatus?
This read-only boolean indicates if Service Specific ADT is enabled. A value of 1 activates SSADT; 2 disables it. It enables advanced timing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.353.2.12.6.1.8 snmpwalk -v2c -c public <target> ATM-FORUM-AUTO-CONFIG::atmfAAL2SscsSsadtStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.353.2.12.6.1.8.1 snmpget -v2c -c public <target> ATM-FORUM-AUTO-CONFIG::atmfAAL2SscsSsadtStatus.1
Start monitoring ATM switches/edge devices (ILMI auto-config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM-FORUM-AUTO-CONFIG::atmfAAL2SscsSsadtStatus OID value, configure state conditions and alerts, and monitor any ATM switches/edge devices (ILMI auto-config) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.353 | atmForum | ATM-FORUM-ILMI40-MIB |
| 1.3.6.1.4.1.353.2 | atmForumUni | ATM-FORUM-ILMI40-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.353.2.12 | atmfAutoConfigGroup | ATM-FORUM-AUTO-CONFIG |
| 1.3.6.1.4.1.353.2.12.6 | atmfAAL2CommonProfileTable | ATM-FORUM-AUTO-CONFIG |
| 1.3.6.1.4.1.353.2.12.6.1 | atmfAAL2CommonProfileEntry | ATM-FORUM-AUTO-CONFIG |
| 1.3.6.1.4.1.353.2.12.6.1.8 | atmfAAL2SscsSsadtStatus | ATM-FORUM-AUTO-CONFIG |